Wiki User
∙ 10y agothe 35 watt lamp will work in a 40 watt ballast.
Wiki User
∙ 15y agoNo, it is not recommended to use a higher-wattage bulb in a fixture than what the ballast is designed for. Using a 34 watt T8 bulb with a 40 watt T12 ballast can lead to decreased efficiency, increased risk of damage to the ballast and bulb, and potential safety hazards. It is best to match the bulb wattage with the ballast rating for optimal performance and safety.
Wiki User
∙ 14y agoShould be fine as long as the ballast is compatible with the 20 W lamp.
Wiki User
∙ 10y agoIt will work, a 40 w bulb is a little brighter than a 34 w and it takes a little more electric power.
Wiki User
∙ 10y agoNo
No, the ballast's output is not matched to operate a fluorescent bulb.
Yes, a ballast is required for a 250-watt sodium bulb. The ballast is essential for regulating the electrical current and ensuring the bulb operates properly. Be sure to select a ballast designed specifically for the type of sodium bulb you have.
No, it is not recommended to run a 50 watt halide bulb on a 100 watt halide ballast. The ballast should match the wattage of the bulb to ensure proper operation and to avoid potential damage to the bulb and ballast. It is best to use a ballast that is rated for the wattage of the bulb being used.
No, it is not recommended to use a 150 watt bulb in a fixture designed for a 250 watt bulb. The fixture is designed to handle a specific wattage and using a lower wattage bulb can lead to inefficient lighting or potential safety hazards due to overheating. It's best to use the appropriate wattage bulb for the fixture.
Not recommended. It would work but shorten lamp life and may cause risk of fire. However, if you just wanted to check a lamp was capable of striking it would be ok for a few minutes. I've done the opposite in the past and used a 150w lamp with a 100w ballast. Works, but not good for any of the components, including lamp.
If the 250 watt bulb is a HID or similar type the ballast comes complete with the fixture. The bulb socket is also part of the fixture and comes pre-wired to the socket. To connect the bulb to the fixture all that has to be done is just screw it into the fixture's socket.
The light bulb needs to match the ballast in the fixture.
No, the ballast's output is not matched to operate a fluorescent bulb.
Yes, a ballast is required for a 250-watt sodium bulb. The ballast is essential for regulating the electrical current and ensuring the bulb operates properly. Be sure to select a ballast designed specifically for the type of sodium bulb you have.
No, it is not recommended to run a 50 watt halide bulb on a 100 watt halide ballast. The ballast should match the wattage of the bulb to ensure proper operation and to avoid potential damage to the bulb and ballast. It is best to use a ballast that is rated for the wattage of the bulb being used.
No, you can not use a 150 watt high pressure sodium bulb with a 70 watt ballast.
Look at the wattage capacity of the fixture. Some fixtures are limited to 65 watts, some can take much more. If you use a larger bulb than what the fixture was designed for you create a fire risk. If you need to use a larger bulb but the fixture is limited to 65 watts, you need to change the fixture.
No, it is not recommended to use a 150 watt bulb in a fixture designed for a 250 watt bulb. The fixture is designed to handle a specific wattage and using a lower wattage bulb can lead to inefficient lighting or potential safety hazards due to overheating. It's best to use the appropriate wattage bulb for the fixture.
no you cant if the ballast is for a 150w bulb you have to retro fit the ballast then u can
Not recommended. It would work but shorten lamp life and may cause risk of fire. However, if you just wanted to check a lamp was capable of striking it would be ok for a few minutes. I've done the opposite in the past and used a 150w lamp with a 100w ballast. Works, but not good for any of the components, including lamp.
It is recommended to use a bulb with wattage that is compatible with the fixture to ensure proper functioning and safety. Using a smaller wattage bulb in a bigger fixture may not provide sufficient illumination or could overload the fixture.
No. The bulb has to match the ballast wattage exactly. And you can't interchange different lamps (like metal halide) either. The ballast is specific to that wattage and lamp type. The bulb will either burn out quickly or just not work properly at all