0
The only way I know how to tester one is with a device called a Flicker tester. I know Mitchell Instruments sells them for under $100.
Wiki User
∙ 12y ago
No, it is not recommended to use a Mercury lamp in a metal halide ballast. Mercury lamps and metal halide lamps have different operating characteristics and using them interchangeably can result in poor performance, reduced lamp life, and potential safety hazards. It is important to use the correct type of lamp for the corresponding ballast.
Wiki User
∙ 14y agoNo you cannot!!
You would have to replace the transformer.
Wiki User
∙ 14y agoSee related link below.
Add your answer:
Earn +20 pts
Does a metal halide and mercury vapor use the same ballast?
No, metal halide and mercury vapor lamps do not use the same ballast. Metal halide lamps require a ballast specifically designed for metal halide lamps, while mercury vapor lamps require a ballast designed for mercury vapor lamps. Using the wrong ballast can result in poor performance and potential safety hazards.
Can you use a 70 watt metal halide lamp in a 150 watt ballast?
No, it is not recommended to use a 70 watt metal halide lamp with a 150 watt ballast. The lamp and ballast wattage should match to ensure proper operation and to prevent damage to the lamp or ballast. It is best to use a compatible lamp and ballast with matching wattages.
Can a 400 watt high pressure sodium bulb be used in a 400 watt metal halide ballast?
I actually have a 400w hps ballast and I can also use my 400w metal halide bulb in it with no problem. So what your saying is they do, but they dont? the answer is, they dont. You can get universal bulbs hps to plug into a mh ballast they have a miniturized igniter inside the bulb. As I understand it, a 400W metal halide bulb can be used with a 400W hps ballast, but not the converse. A MH bulb has the igniter in the bulb, and the HPS has it in the ballast--which pretty much goes along with your comment above. Apparently the double presence of the igniter in the HPS setup is OK.you can run metal halide in same wattage's but not hps in metal halide systems.you can run such as (same wattage's)250 watt metal halide-400 watt halide ect in hps systems but not hps bulbs in halide systems. they make conversion bulbs to run halide in hps as well and vice versa.
Can you use a 70 watt high pressure sodium bulb in a 100 watt ballast?
No. The bulb has to match the ballast wattage exactly. And you can't interchange different lamps (like metal halide) either. The ballast is specific to that wattage and lamp type. The bulb will either burn out quickly or just not work properly at all
Which light is brighter Metal Halide or mercury Vapor?
Metal Halide lights are generally brighter than mercury vapor lights. Metal halide lights produce a higher quality and more natural light, making them a popular choice for outdoor lighting in stadiums, parking lots, and other large commercial spaces. Mercury vapor lights tend to have a bluish-green tint and are less bright compared to metal halide lights.
Can you use a 400W high pressure sodium bulb in a metal halide ballast?
No, the ballast has to be matched to the lamp. 250 watt ballast, 250 watt lamp. Also be sure to match the lamp type to the proper ballast even though the wattage is the same. HPS ballast to HPS lamp, Metal halide ballast to metal halide lamp and mercury vapour lamp to mercury vapour ballast.
Does a metal halide and mercury vapor use the same ballast?
No, metal halide and mercury vapor lamps do not use the same ballast. Metal halide lamps require a ballast specifically designed for metal halide lamps, while mercury vapor lamps require a ballast designed for mercury vapor lamps. Using the wrong ballast can result in poor performance and potential safety hazards.
Can you use 250W metal halide bulb in a 1000W metal halide ballast?
No. The lamp has to match the ballast. The lamp will not ignite if the wrong ballast is used.
Can you use a sodium lamp in a mercury ballast?
No you can't. You can use a metal halide lamp of the exact wattage of the original mercury lamp. You cannot vary on wattage at all.
Can you use a 70 watt metal halide lamp in a 150 watt ballast?
No, it is not recommended to use a 70 watt metal halide lamp with a 150 watt ballast. The lamp and ballast wattage should match to ensure proper operation and to prevent damage to the lamp or ballast. It is best to use a compatible lamp and ballast with matching wattages.
Will a hps luminaire run a metal halide lamp?
Yes the ballast and starter are the same you can run halide in hps, but not hps in halide.
Can a 400 watt high pressure sodium bulb be used in a 400 watt metal halide ballast?
I actually have a 400w hps ballast and I can also use my 400w metal halide bulb in it with no problem. So what your saying is they do, but they dont? the answer is, they dont. You can get universal bulbs hps to plug into a mh ballast they have a miniturized igniter inside the bulb. As I understand it, a 400W metal halide bulb can be used with a 400W hps ballast, but not the converse. A MH bulb has the igniter in the bulb, and the HPS has it in the ballast--which pretty much goes along with your comment above. Apparently the double presence of the igniter in the HPS setup is OK.you can run metal halide in same wattage's but not hps in metal halide systems.you can run such as (same wattage's)250 watt metal halide-400 watt halide ect in hps systems but not hps bulbs in halide systems. they make conversion bulbs to run halide in hps as well and vice versa.
Can you use a 70 watt high pressure sodium bulb in a 100 watt ballast?
No. The bulb has to match the ballast wattage exactly. And you can't interchange different lamps (like metal halide) either. The ballast is specific to that wattage and lamp type. The bulb will either burn out quickly or just not work properly at all
Do you have to use a ballasts for a 250 watt metal halide?
Yes, the ballast is an intricate part of the fixture that the lamp screws into regardless of what size wattage the lamp is.
Can you replace a 150 watt metal halide lamp with a 175 watt?
The light bulb needs to match the ballast in the fixture.
How can you tell if the halophane light you have is a metal halide or high pressure sodium?
You can generally determine if a halophane light is metal halide or high pressure sodium by looking at the color of the light it emits. Metal halide lights produce a white or bluish-white light, while high pressure sodium lights emit a yellowish-orange light. Additionally, you can refer to the manufacturer's specifications or labels on the light fixture for more information.
What is the Harmonized Tariff number for a Metal halide lamp?
A metal halide lamp's Harmonized Tariff number would fall in the category of "8539.32.00 Mercury or sodium vapor lamps; metal halide lamps". See "Related Links" below for the US government's online list of Harmonized Tariffs.
