Yes, because the "higher" watt energy saver bulb (cfl) is actually a lower watt bulb than a standard (incandescent). Always look at the actual watts, not the 'light equivalent watts'. 11 watt low energy tube = 60 watts of old-fashioned light. More light, less heat!
It is recommended to use a bulb with wattage that is compatible with the fixture to ensure proper functioning and safety. Using a smaller wattage bulb in a bigger fixture may not provide sufficient illumination or could overload the fixture.
Yes, I have been running a 400w MH in a 1000w ballast for 3 months no problem. The bulb will only draw what is need to power the bulb. (A 400w bulb draws ONLY 400w from the ballast) people try to scare others by saying your house will burn down or your bulb will blow up. Just keep the bulb cool and it will be fine OR buy a Dimmable ballast.
A halogen bulb produces about 30% more light than an incandescent of the same power rating. So an incandescent can be replaced by a halogen of 30% less power.
However CFLs and LEDs use significantly less power to produce an equal amount of light.
Yes, but never the other way around. Never go above the fixture rating wattage the manufacturer assigns to their fixture.
The fixture recommended wattage is a maximum limit. Using a smaller wattage bulb is fine.
Smaller watt bulb will prevail-
The bulb may last longer but may not be as bright
as a higher number wattage bulb.
Yes, the reason for watt rating lamp fixtures is to prevent oversizing the lamp with a higher wattage bulb than the manufacturer recommends. Lower wattage bulbs are fine.
yes
No, it is not recommended to use a 150 watt bulb in a fixture designed for a 250 watt bulb. The fixture is designed to handle a specific wattage and using a lower wattage bulb can lead to inefficient lighting or potential safety hazards due to overheating. It's best to use the appropriate wattage bulb for the fixture.
Using a higher wattage bulb than what the fixture is rated for can result in overheating, potentially causing damage to the fixture or even starting a fire. It is important to always match the wattage of the bulb to the rating of the fixture for safety.
If the socket threads of the lamp are the same then yes the bulbs can be interchanged. The 5 watt bulb will glow brighter than the 4 watt bulb. If by a 4 watt light you mean a 4 watt fixture, then it is not recommended to place a larger wattage lamp in a fixture that is rated by the manufacturer at a specific operating wattage
The wattage of the UVB fixture for a beardie should be 26 watt bulb.
It is not safe to use a 150 watt light bulb in a fixture rated for 75 watts as it can overload the fixture and create a fire hazard. It's important to always use a light bulb with a wattage that is equal to or lower than the fixture's rating to prevent damage and ensure safety.
If the 250 watt bulb is a HID or similar type the ballast comes complete with the fixture. The bulb socket is also part of the fixture and comes pre-wired to the socket. To connect the bulb to the fixture all that has to be done is just screw it into the fixture's socket.
No, it is not recommended to use a 150 watt bulb in a fixture designed for a 250 watt bulb. The fixture is designed to handle a specific wattage and using a lower wattage bulb can lead to inefficient lighting or potential safety hazards due to overheating. It's best to use the appropriate wattage bulb for the fixture.
Using a higher wattage bulb than what the fixture is rated for can result in overheating, potentially causing damage to the fixture or even starting a fire. It is important to always match the wattage of the bulb to the rating of the fixture for safety.
If the socket threads of the lamp are the same then yes the bulbs can be interchanged. The 5 watt bulb will glow brighter than the 4 watt bulb. If by a 4 watt light you mean a 4 watt fixture, then it is not recommended to place a larger wattage lamp in a fixture that is rated by the manufacturer at a specific operating wattage
Look at the wattage capacity of the fixture. Some fixtures are limited to 65 watts, some can take much more. If you use a larger bulb than what the fixture was designed for you create a fire risk. If you need to use a larger bulb but the fixture is limited to 65 watts, you need to change the fixture.
The wattage of the UVB fixture for a beardie should be 26 watt bulb.
It is not safe to use a 150 watt light bulb in a fixture rated for 75 watts as it can overload the fixture and create a fire hazard. It's important to always use a light bulb with a wattage that is equal to or lower than the fixture's rating to prevent damage and ensure safety.
It is not recommended to exceed the recommended wattage for a fixture as it can cause overheating, damage to the fixture, and pose a fire hazard. Stick to the manufacturer's recommendations to ensure safety and proper functioning of the fixture.
As long as the fixture in the confined space is approved for confined space and the wattage rating of the fixture is not below 60 watts then there should be no problem using a 60 watt bulb in this situation.
The light bulb needs to match the ballast in the fixture.
Light fittings should not be overloaded electrically because overheating can cause a fire. Alternatively you could use a 20 watt low-energy bulb.
No, the ballast's output is not matched to operate a fluorescent bulb.