0
I do this all the time when I'm out on a job and can't find the right bulb It totally works, however I guarantee it would void some kind of warranty... And probably be dangerous.
Wiki User
∙ 13y ago
No, a Mercury vapor bulb cannot be used in a metal halide fixture. They have different operating specifications and using the incorrect type of bulb could result in damage to the fixture or even pose a safety hazard. It is important to use the correct type of bulb recommended for the fixture.
Add your answer:
Earn +20 pts
Can a metal halide bulb be used in the place of a mercury vapor bulb?
No, metal halide bulbs and mercury vapor bulbs are different types of lighting technology with varying operating requirements. Using a metal halide bulb in place of a mercury vapor bulb can result in inefficient operation and potentially damage the fixture. It is best to use the type of bulb specified by the manufacturer for optimal performance.
Does a metal halide and mercury vapor use the same ballast?
No, metal halide and mercury vapor lamps do not use the same ballast. Metal halide lamps require a ballast specifically designed for metal halide lamps, while mercury vapor lamps require a ballast designed for mercury vapor lamps. Using the wrong ballast can result in poor performance and potential safety hazards.
Can you replace a mercury vapor bulb with a metal halide?
Yes, you can replace a mercury vapor bulb with a metal halide bulb as they are both types of HID (high-intensity discharge) lighting. However, you may need to also replace the ballast to match the new bulb type, as metal halide bulbs usually require a different ballast. Additionally, check the wattage and size of the new metal halide bulb to ensure it is compatible with the fixture.
Which light is brighter Metal Halide or mercury Vapor?
Metal Halide lights are generally brighter than mercury vapor lights. Metal halide lights produce a higher quality and more natural light, making them a popular choice for outdoor lighting in stadiums, parking lots, and other large commercial spaces. Mercury vapor lights tend to have a bluish-green tint and are less bright compared to metal halide lights.
What metals can be obtained in cinnabar?
Mercury is the metal that can be obtained from cinnabar. Cinnabar is a mineral form of mercury sulfide, and when heated, it decomposes to release elemental mercury vapor. Mercury is then condensed out of the vapor to obtain the metal.
Which light is brighter Metal Halide or mercury Vapor?
Metal Halide lights are generally brighter than mercury vapor lights. Metal halide lights produce a higher quality and more natural light, making them a popular choice for outdoor lighting in stadiums, parking lots, and other large commercial spaces. Mercury vapor lights tend to have a bluish-green tint and are less bright compared to metal halide lights.
Does a metal halide and mercury vapor use the same ballast?
No, metal halide and mercury vapor lamps do not use the same ballast. Metal halide lamps require a ballast specifically designed for metal halide lamps, while mercury vapor lamps require a ballast designed for mercury vapor lamps. Using the wrong ballast can result in poor performance and potential safety hazards.
What is the Harmonized Tariff number for a Metal halide lamp?
A metal halide lamp's Harmonized Tariff number would fall in the category of "8539.32.00 Mercury or sodium vapor lamps; metal halide lamps". See "Related Links" below for the US government's online list of Harmonized Tariffs.
How might you distinguish a sodium vapor streetlight from a mercury vapor streetlight?
You can distinguish sodium vapor streetlights from mercury vapor streetlights by observing their color. Sodium vapor streetlights emit a warm orange-yellow light, while mercury vapor streetlights produce a blue-white light. Sodium vapor streetlights are also generally more energy-efficient than mercury vapor streetlights.
What is CFL mhl and hpmv lamps?
The abbreviations are CFL - Compact Fluorescent Lamp, MHL - Metal Halide Lamp, HPMV - High Pressure Mercury Vapor, and one more is HPS - High Pressure Sodium lamp
What is the difference between metal halide and mercury vapour lights?
In a metal halide light, the electricity heats a metal filament to a high temperature creating an extremely bright light. Metal ions burn off. A gas of the halide group (chlorine, bromine, iodine) reacts with the metal ions that have burned off and redeposit them on the filament. Because the filament is constantly being rebuilt, it can be brighter than a regular light bulb. Also it heats the gas to the point where the gasses give off light. So both the filament and the gasses give off light. With a mercury vapor light, mercury vapor is heated until it gives off ultraviolet light. The filament only serves to heat the mercury. It does not give off light. This light is used to excite phosphrus and other chemicals on the edge of the bulb. Those chemicals glow in the visible light spectrum. As a result, they illuminate.
What metals can be obtained in cinnabar?
Mercury is the metal that can be obtained from cinnabar. Cinnabar is a mineral form of mercury sulfide, and when heated, it decomposes to release elemental mercury vapor. Mercury is then condensed out of the vapor to obtain the metal.
Do you have to use a special fixture for mercury-vapor bulbs?
Yes, mercury-vapor bulbs require special fixtures that control the flow of electricity and provide the correct voltage for the bulb to operate safely and efficiently. Using the wrong fixture can cause damage to the bulb or even pose a safety hazard.
Can a 400 watt high pressure sodium bulb be used in a 400 watt metal halide ballast?
I actually have a 400w hps ballast and I can also use my 400w metal halide bulb in it with no problem. So what your saying is they do, but they dont? the answer is, they dont. You can get universal bulbs hps to plug into a mh ballast they have a miniturized igniter inside the bulb. As I understand it, a 400W metal halide bulb can be used with a 400W hps ballast, but not the converse. A MH bulb has the igniter in the bulb, and the HPS has it in the ballast--which pretty much goes along with your comment above. Apparently the double presence of the igniter in the HPS setup is OK.you can run metal halide in same wattage's but not hps in metal halide systems.you can run such as (same wattage's)250 watt metal halide-400 watt halide ect in hps systems but not hps bulbs in halide systems. they make conversion bulbs to run halide in hps as well and vice versa.
Is mercury irritable?
No, the liquid metal itself is rather inert, though the vapor is toxic.
What is the type of gas in an arc lamp?
The type of gas commonly used in an arc lamp is typically a noble gas such as xenon or mercury vapor. These gases are chosen for their ability to produce a bright and steady light when an electric current is passed through them in the lamp.
Which property of sample of mercury is different at 320 kelvin than at 300 kelvin?
The vapor pressure of mercury at 320 K would be higher than at 300 K. Mercury is a liquid metal that has a higher vapor pressure at higher temperatures, resulting in more mercury vapor in the sample at 320 K compared to 300 K.
