Let's try it in REAL units!!
Volume equals length times cross section (pi x radius squared).
(lets do it in cm, as that will give us an answer in ml)
So for a 10cm diameter pipe, 1m long that's:
100cm x 3.142 x 5cm squared
=7855 cubic centimetres. Now 1000 CC = 1 litre (gotta love metric!). so one metre of 100mm pipe will hold 7.855 litres of whatever!
To find the volume of water in a pipe you need to know the diameter and the length of the pipe. The formula is pi x radius squared x the length in feet x 12 to get cubic inches didvide by 277.42 ( cubic inches in an imperial gallon ) = gallons in the pipe.
For example 4 inch diameter pipe 10 feet long holds 5.43 gallons of water.
3.14 x ( 2 x 2 ) x 10 x 12 = 1507.2 cubic inches / 277.42 = 5.43 gallons
To find the volume of water in a pipe in metric units, you can use the formula for the volume of a cylinder: V = πr^2h, where r is the radius of the pipe and h is the height of water inside the pipe. Make sure to convert all measurements to the appropriate metric units before plugging them into the formula.
The volume of water in a pipe can be calculated using the formula: volume = area x length. For a 22mm pipe, the area can be calculated using the formula for the area of a circle: πr^2, where r is the radius (11mm). The length of the pipe in this case is 1 meter. By substituting these values into the formula, you can calculate the volume of water in the pipe.
The volume of water in a pipe can be calculated using the formula: V = πr^2h, where V is the volume, r is the radius of the pipe (which is half the diameter), and h is the length of the pipe. Given a 4-inch pipe, the radius is 2 inches, and converting to feet, it becomes 0.167 feet. Therefore, the volume of water in a 4-inch pipe that is 10 feet long is approximately 7.89 cubic feet.
The volume of a pipe is proportional to the square of its diameter. Since the diameter of the 8-inch pipe is twice that of the 4-inch pipe, the 8-inch pipe can carry four times the volume of the 4-inch pipe.
The volume of water in a pipe depends on its length as well as its diameter. To calculate the volume of water in a 3-inch pipe, you would need to know the length of the pipe as well. Once you have that information, you could use the formula for the volume of a cylinder (πr^2h, where r is the radius of the pipe and h is the length of the pipe) to find the volume in cubic inches, which can then be converted to gallons.
The water capacity of two 500' water pipes will depend on the pipe diameter. Typically, water pipe capacity is measured in gallons per minute (GPM) or liters per minute. The larger the diameter of the pipe, the higher the water capacity it can handle.
A pipe has the shape of a cylinder; just use the formula for the volume of a cylinder. In metric units, you have the advantage that the units are consistent. For example, if the radius and height of the cylinder are measured in decimeters, the volume will be in cubic decimeters (= liters).
Find the volume in cubic feet and multiply by 7.48
The volume of water in a 4-inch diameter, 1-foot section of pipe is 0.6528 gallons of water.
The volume of water in a 1 inch x 100 foot pipe is: 4.08 US gallons.
The volume of water in a pipe can be calculated using the formula: volume = area x length. For a 22mm pipe, the area can be calculated using the formula for the area of a circle: πr^2, where r is the radius (11mm). The length of the pipe in this case is 1 meter. By substituting these values into the formula, you can calculate the volume of water in the pipe.
measure the radius of the pipe. (half the diameter - the width of the pipe) then measure the length of the pipe. then use the formula pi (3.14) x radius2 x length. the answer is the volume in the pipe
There need not be any water in the pipe! The volume of the pipe is 1044 Imperial gallons
A pipe with a volume of 44.17 cubic inches holds up to: 0.1912 US gallons of water.
The volume of water in 1,500 feet of six-inch pipe is: 294.52 cubic feet or 2,203.2 US gallons.
This pipe has a volume 437.4 gallons.
The internal diameter of the pipe times pi times its length will yield the volume it can contain. The outer diameter of the pipe times pi times its length will yield the volume that the pipe will displace when it is submerged or buried. The volume the pipe will displace minus the volume it will contain will yield the volume of material that makes up the pipe.
The volume is 0.7418 cubic feet OR 1,281.8 cubic inches. This pipe would contain 5.549 gallons of water.