16*24=384
3*4=12
384/12=32
The answer is 32 tiles
To cover a 16 cm by 24 cm area, you would need (16/3) * (24/4) = 32 tiles.
No, a centimeter is a unit of length, while a square centimeter is a unit of area. 1 square centimeter is equivalent to an area of a square with side lengths of 1 centimeter each.
If the area is "well behaved" or if most offcuts are used then 77 tiles will suffice. However, if the area is not rectangular then you are likely to require more. Also, unless the length or width of the rectangular area is an exact multiple of 19.5 inches, there will be many off-cuts.
You would need 138 tiles to cover 115 square feet with 12-inch tiles. To calculate this, divide the total square footage (115) by the area of one tile (1 square foot for a 12-inch tile). So, 115 (sq ft) / 1 (sq ft per tile) = 115 tiles.
One centimeter is equal to 1 square centimeter. This is because a square centimeter is the area of a square with sides measuring 1 centimeter each.
To find out how many 20-inch tiles you will need to cover 100 sq ft, you first need to calculate the area of one tile. A 20-inch square tile covers 20 x 20 = 400 sq inches. Since 1 sq ft = 144 sq inches, you divide 400 by 144 to get approximately 2.78, meaning it will take about 2.78 tiles to cover 1 sq ft. Therefore, to cover 100 sq ft, you will need about 278 tiles.
If the tiles measure 12 inches square then the area of each tile is 1 sq foot. Therefore 1400 tiles are needed to cover an area of 1400 square feet. However, the actual dimensions of the area being tiled can affect the number of tiles required so closer examination is needed.
125
One side of a square is 10 inches long. How many one square inch tiles are needed to cover its area?
You will need 44 six inch tiles to cover 11 square feet.
If your tiles are 12 x 12, 368 would cover it. Buy extra for breakage.
No. of tiles =Area of floor / Area of tiles. area of floor = 300 X 50 sq cm. area of tiles = 20 X10 sq cm.hence, no. of tiles = 300 X50 /200 =75
can you completely cover a 3ftx6ft area with 2ftx2ft tiles
5*6=30*12=360/4=90 tiles
1120 plus 10% for salvage= roughly1230tiles. you can probably return unused tiles
Depends on how big the tiles are.
You would need a total of 89 tiles (88.88 tiles exactly) with those measurements to cover that area.
It should take about 825 1 foot square tiles to cover a floor with those dimensions. This assumes roughly a 10% waste factor.