0
Add your answer:
Earn +20 pts
How many 3.5 inch pieces can be cut from a ribbon that is 63 inches long?
To find out how many 3.5 inch pieces can be cut from a 63-inch ribbon, divide the total length of the ribbon (63 inches) by the length of each piece (3.5 inches). The calculation is 63 ÷ 3.5 = 18 pieces. Therefore, 18 pieces of 3.5 inches can be cut from a 63-inch ribbon.
How do you figure quarter inch drop per foot?
To calculate a quarter-inch drop per foot, you would divide 0.25 inches by 12 inches (since there are 12 inches in a foot). This would give you a drop of approximately 0.02083 inches per inch (or approximately 2.083%).
How many gallons of water in a three quarter inch copper pipe 150 ft long?
That's a cylinder. The volume of a cylinder is (pi) (radius)2 (length)Radius = 1/2 diameter = 3/8 inch = 0.03125 footLength = 150-ftVolume = (pi) (.03125)2 (150) = 0.4602 cubic foot = 3.442 gallons (rounded)That's the volume of the piece of pipe. We have no way of knowinghow much water may be in it. It could even be empty.
How many gallons of water in a two and one half inch fire hose?
That's kinda gonna depend on how long the hose is. Without doing any figuresor math at all, we're pretty sure that a one-foot-long piece of 2-1/2" hose willhold more water than a 100-foot-long piece.In fact, when we do some figures, we can tell you that it'll hold one gallon of waterin every 47.1 inch length of hose.
How many inches in a board foot?
A board foot is a unit of measure for lumber volume equal to 144 cubic inches, which is equivalent to a board that is 1 inch thick, 12 inches wide, and 12 inches long.
A piece of ribbon is 42 inches long is to be cut into 3 divided by 1 divided 2 inch pieces how many piec will result?
A piec of ribbon is 42 inches long is to be cut into 3 divided by 1 divided by 2 inch piece how many piece will result ?
How many inches long is a piece of ribbon that measures 1 foot 7inches?
19 inches
How long in inches is a 5 foot piece of 2-inch conduit?
60 inches
How many 3.5 inch pieces can be cut from a ribbon that is 63 inches long?
To find out how many 3.5 inch pieces can be cut from a 63-inch ribbon, divide the total length of the ribbon (63 inches) by the length of each piece (3.5 inches). The calculation is 63 ÷ 3.5 = 18 pieces. Therefore, 18 pieces of 3.5 inches can be cut from a 63-inch ribbon.
Im having problems with your soft pointe shoes. I know how to fold the ribbon and then sew it on. But do i fold the ribbon to the left or to the right?
the best way to sew on ribbon is actually to NOT cut it but leave it in one long piece that goes under the foot on the inside of the shoe.
How long is the ribbon worm?
1 inch to 85 feet
What is a fertile ribbon?
A long and thin piece of land where crops grow easily is often referred to as a "fertile ribbon."
A piece of ribbon 1 ft long is cut from a 3 yd spool of ribbon How much ribbon remains on the spool?
3yd - 1 feet
What is a ribbon race in horse back riding?
The ribbon race on Horseback is when you have two riders each holding an end to a piece of crepe paper ribbon (about 3 foot long). They race around the ring being timed or they perform various tasks as called out by an announcer till one of the teams breaks or drops the ribbon. It is great fun.
How many 4.875 inches long piecesof ribbon can be cut from 30 inches piece of ribbon?
Devide 30 by 4.875 that gives 6 pieces of ribbon 4.875 inches long and 0.75 inches of ribbon left over.
How many pieces can you get from a 115 inches of ribbon?
This will depend on how long you would like each piece to be. If each piece is to be 1 inch long, then 115 pieces could be cut. If each piece is 2 inches long, then 57 pieces with 0.5 inches left over If each pieces is 5 inches long, then 23 pieces and so on and so forth.
What is 20 foot long?
A piece of plank that is 240 inches long is 20 foot long.
