To find the surface area of a 15,000-gallon pool that is 7 feet deep, we first convert gallons to cubic feet. There are about 7.48 gallons in a cubic foot, so 15,000 gallons is approximately 2,004 cubic feet (15,000 ÷ 7.48). Since the pool is 7 feet deep, we can find the surface area by dividing the volume by the depth: 2,004 cubic feet ÷ 7 feet = approximately 286 square feet.
A gallon of water occupies 231 cubic inches of space, as there are 231 cubic inches in a gallon. To find the area it fills in inches, we need to divide this volume by the height at which the water is spread. If we assume the water is spread evenly at a height of 1 inch, the area covered by a gallon of water would be 231 square inches.
1 sq ft = 144 sq inches 1 sq ft x 1 inch deep = 144 cubic inches / (231 cubic inches per gallon) = 0.6234 gallon (rounded)
About 38.49 5 gallon buckets in a cubic yard. a 5 gallon bucket is 10 inches at the bottom 11 inches at the top and 14 inches tall so it holds .02598 of a cubic yard or .7 cubic foot or 1212.262 cubic inches and the about part depends on compaction.
Gallons and square miles can't be compared; a gallon is a measure of volume, whereas a square mile is a measure of area. But let's try to make sense of the apparently nonsense question. What if the question poster had asked, "How many gallons are there in a one-square-mile puddle of water that is a quarter of an inch deep?" That calculation is non-trivial and may yield an answer that is surprising. Here are some units and conversions that may be helpful: 1 square mile = 27878400 square feet1 inch = 0.083333 foot1 cubic foot = 1728 cubic inches1 gallon = 231 cubic inchesIf you did the arithmetic right, that rather large puddle contains 4,344,685.7 gallons of water. (The proof is left to the reader.)
There are 2,419.5 square feet in a 12,000 gallon pool if it is 6 feet deep. This can be calculated by converting gallons to cubic feet and then dividing by the depth of the pool in feet.
A 15,000-gallon pool has a volume of about 2,005 cubic feet.
350
1.6042 square feet (rounded)
How deep do you want that ?If you want it 1.6 inches deep, then it can cover 1 square foot.If you want it 10-ft deep, then it can't cover that much area.
At 15,000 feet, the water pressure is approximately 6,525 pounds per square inch (psi). This pressure increases with depth due to the weight of the water column above.
Don't know. Can't tell. What size bottom ? Round or square ? How long ? How wide ? How deep ?
how many square feet would 1 gallon of water come on at 1 inch deep?
A gallon of water occupies 231 cubic inches of space, as there are 231 cubic inches in a gallon. To find the area it fills in inches, we need to divide this volume by the height at which the water is spread. If we assume the water is spread evenly at a height of 1 inch, the area covered by a gallon of water would be 231 square inches.
You will need about 463 cubic yards (around 594 tons) of gravel for this area.
question is meaningless. gallon is a unit of volume, sq ft is a unit of area. the above is a horrible answer. simply put your question was miss worded. i believe you meant cubic foot (not square foot). the answer is 7.481 gallons in a cubic foot
1 square foot = 144 square inches1 gallon = 231 cubic inchesVolume = (16 x 144 x 6) = 13,824 cubic inches = (13,824 / 231) = 59.844 gallons (rounded)
One US Gallon has 231 cubic inches, and the area that you've given is 36 cubic inches. So, 36/231 gallons is the exact answer, which is approximately .1558 gallons (15.6% of 1 gallon)