180. well that is a partial answer and is only true if those 1.8 amps are pushed through at 100 volts.
Watts= Amps times Volts
An amp (Full name=Ampere) is 6.241 × 1018 electrons passing a point in a circuit in one second. It doesn't matter what the voltage is, an amp is as stated above.
AT 12 volts, watts=1.8*12=21.6
At 120 volts, watts=1.8*120=216
At 1200 volts, watts=1.8*1200=2160
Without knowing the voltage, one cannot determine the wattage.
There are some small discrepancies between Alternating Current (AC) Direct Current (DC). With DC, the formula can be considered correct. With AC, it is an average Wattage. Why, you ask. Because AC voltage Is kind of an average. As the voltage alternates between positive and negative, it really goes a bit higher than 120 volts. In fact it goes 1.414... times 120 volts or as high as and as low as ±169.68 volts. (1.414... is a rough approximation of the square root of 2.) This formula, Peak Voltage= VoltageAC Times Square root of 2, is called the "root mean square."
You can look all these terms up by searching for them on the internet.
Ampere (Amp) (A)
Volts (V)
Watts (W)
Alternating Current (AC)
Direct Current (DC)
Root Mean Square (RMS)
To summarize the formula:
W= V * A = Watts
V= W / A = Volts
A= W / V = Amps
Notice: you must know two of the relevant values.
<<>>
1.8 amps is equal ot zero watts. Watts is the product of amps times volts. To answer this question a voltage value must be stated.
1 MegaWatt (1MW) is equal to One Million Watts.
AnswerIf you mean 'unit' as in 'kilowatt hour', then there are no units in a megawatt (not 'mega watt'). Units are used to measure energy whereas a watt is used to measure power -as these are different quantities, you cannot convert one into the other. Your question is a little like asking, "How many kilometres per hour are there in a million kilometres?"
To calculate the amperage, use the formula Amps = Watts / Volts. In this case, 18VA is equivalent to 18 Watts (VA = Watts for DC circuits), so it would be 18W / 12V = 1.5 amps.
watts = volts * amps--> Amps = watts/ volts therefore; 2000/220= 9.09 amps
To find the amperage, you can use the formula: Watts = Volts x Amps. Rearranging it, we get Amps = Watts / Volts. Plugging in the values for 3000 Watts and 460 Volts, we get: Amps = 3000 / 460 = 6.52 amps.
The formula to calculate the relationship between amps, volts and watts is Volts X Amps = Watts or Volts = Watts / Amps or Amps = Watts / Volts therefore; 200 Watts divided by 1.95 Amps is 102.5641 Volts.
41.666 amps. Divide watts by volts.
To calculate the amperage, use the formula Amps = Watts / Volts. In this case, 18VA is equivalent to 18 Watts (VA = Watts for DC circuits), so it would be 18W / 12V = 1.5 amps.
watts = volts * amps--> Amps = watts/ volts therefore; 2000/220= 9.09 amps
There are zero watts in 730 amps. Watts is the product of amps times volts. As you can see without a voltage no answer can be given.
Amps, volts and watts are interrelated, but you need to do a little math. Amps * Volts = Watts
How many Amps is the fridge pulling? Multiply the Amps by the 120V circuit you're plugging into and you'll get your Watts.
I t depends. Watts = Amps times volts. 40 amps x 120 volts =4800 watts or 40 Amps x 12 volts = 480 watts.
There is zero watts in 10 amps.
To find the amperage, you can use the formula: Watts = Volts x Amps. Rearranging it, we get Amps = Watts / Volts. Plugging in the values for 3000 Watts and 460 Volts, we get: Amps = 3000 / 460 = 6.52 amps.
The formula to calculate the relationship between amps, volts and watts is Volts X Amps = Watts or Volts = Watts / Amps or Amps = Watts / Volts therefore; 200 Watts divided by 1.95 Amps is 102.5641 Volts.
You need the formula: Amps * Volts = Watts But you get to do the math.
The formula you are looking for is I = W/E. Amps = Watts/Volts.
41.666 amps. Divide watts by volts.