0
Add your answer:
Earn +20 pts
How many millimeters are between 47 and 51 on the meter stick?
There are 40 millimeters between 47 and 51 on a meter stick. Each centimeter on a meter stick contains 10 millimeters, so the difference between 47 and 51 is 4 centimeters, which is equivalent to 40 millimeters.
What is difference between meter socket adapter and panel surge arrester?
A meter socket adapter is used when solar energy is required to be fed back to the grid from a home owners solar array system. The adapter is on the line side of the service between the utility meter and the utility meter base. A meter base surge protector is a device to stop surging from lightning strikesfrom the grid from entering your home. This device is also connected to the line side of the service between your utility meter and the utility meter base.
What is the difference between a meter stick and a yard stick?
A meter stick is a measuring tool that is typically 1 meter in length and is subdivided into centimeters and millimeters, based on the metric system. A yard stick is a measuring tool that is typically 1 yard in length and is subdivided into inches, feet, and sometimes centimeters, based on the imperial system. The main difference is in the units of measurement each stick is calibrated for.
What is the difference between a nanometer and a meter?
A nanometer is one billionth of a meter. It is a unit of length used to measure very small distances, such as the size of molecules or individual atoms. In comparison, a meter is a standard unit of length in the metric system, equal to 100 centimeters or approximately 3.28 feet.
How do you measure end correction of a meter bridge?
The end correction of a meter bridge can be measured by comparing the balance point of a known standard wire to the balance point of an unknown wire on the meter bridge. The difference in lengths between the two balance points is equal to the end correction.
What is the difference between running meter and linear meter?
None.
Difference between meter in and meter out in hydraulics?
"in" and "out" are the direction of the pressure.
What is the Difference between cubic square meter and loaded meter?
Hello
What are the difference between LCR meter and electrochemical impedance spectroscopy?
LCR meter is a device. And electrochemical impedance spectroscopy is a method. So the difference between them are like the difference between pen and writing.
What is the difference between milimeters meters?
1 meter = 1,000 millimeters 1 millimeter = 0.001 meter The difference between 1 millimeter and 1 meter is 999 millimeters. That's the same length as 0.999 meter.
What is the difference between 9 meter square and 9 square meter?
9m2 3mx3m
What is the difference between 1 meter and 0.25 meter?
0.75 metres or 75cm or 750mm
What would be the difference between a linear meter and a normal meter when measuring a 3 meter length of timber?
none
Difference between linear meter and a meter?
Each refers to a length of 1 metre.
What is the difference between a moisture meter and a hygrometer?
They are one and the same.
What is the differecn between 1 meter to 1 millimeter?
1 meter = 1,000 millimeters 1 millimeter = 0.001 meter The difference between 1 meter and 1 millimeter is 999 millimeters = 0.999 meter.
Is there a difference between a meter and a square meter?
Yes. A meter is a unit of length (1 dimension), a square meter is a unit of area (2 dimensions).
