0
This is a voltage drop question. The answer is for two voltages as none was stated.
A #6 copper conductor will limit the voltage drop to 3% or less when supplying 12.5 amps for 300 feet on a 120 volt system.
A #12 copper conductor will limit the voltage drop to 3% or less when supplying 6.25 amps for 300 feet on a 240 volt system.
As you can see at 120 volts, a wire sized two sizes up will be needed. At 240 volts you can downsize one size. If it is possible to find a replacement heating element that will fit the smoker with a 240 volt rating that would be the way to go. Another method would be a transformer fed with 240 volts and have it located at the smoker end of the circuit. The minimum size of the transformer would be 1500 VA (1.5 kW). A comfortable range would be 2000 VA or 2.0 kW step down transformer.
What else can I help you with?
What size wire will carry 52 amps - the service is 8 feet away?
For a distance of 8 feet and a current of 52 amps, a 6-gauge copper wire would be suitable to safely carry the load while minimizing voltage drop. It's important to adhere to local electrical codes and standards when selecting and installing wiring for any electrical system.
What size Aluminum wire will carry 50 Amp load?
For a 50 Amp load, a 6-gauge aluminum wire would be suitable for most installations. It is important to consult local electrical codes and regulations to ensure compliance with safety standards.
What size wire needed with a 100 amp load 250 feet away?
To determine the wire size needed for a 100 amp load 250 feet away, you will need to consider the voltage and allow for voltage drop. For a 100 amp load at 120V over 250 feet, you would need a wire size of at least 1/0 AWG. It's recommended to consult with a licensed electrician to ensure proper wire size for your specific situation.
What size of wire should be used for 60Hz?
The frequency has no direct relationship to the size of wire. Wire is sized as to the amount of current a load draws in a circuit.
How to compute the size of wire with respect to the distance from circuit breaker to the load side?
To compute the size of wire based on the distance from the circuit breaker to the load side, you need to consider the voltage drop along the wire due to its resistance. Use voltage drop calculations to determine the appropriate wire size that will ensure a permissible voltage drop over the distance. Factors like current carrying capacity, material of wire, and other environmental considerations also play a role in determining the wire size. Consulting national electrical codes or using online calculators can help in selecting the right wire size.
What wire size will carry a 40 amp load?
AWG # 8
What size wire to run 225' underground?
Depends on the load it will carry which you failed to list.
Will awg 10 wire carry 30 amps for 30feet?
Yes, a #10 wire will carry 30 amps for 30 feet. If the load is rated as continuous then the wire will have to be derated to 80% capacity which will leave you with 24 workable amps. If the load demands currents higher that 24 amps then you will have to go to the next wire size up which is a #8 which is rated at 45 amps.
What size wire to run 100 ft undergr?
Depends on the load it will carry which you failed to list.
In selectecting the wire size for a line cord you should remember that?
The wire size is large enough to carry the load current and that the cord is properly voltage rated.
What size wire will carry 55 amps 75 feet?
AWG # 6 copper
Where can you get a fuseable link?
a fuseable link is just a length of wire that will carry a certain load. check the awg (american wire guage) ratings and install that size wire at the power source of that circuit
Can you reduce amperage by using thicker wire with a constant voltage?
The amperage flowing through a wire is directly related to the load placed on the circuit, and has nothing to do with wire size, except that a larger wire will carry more amperage. Increasing wire size will not lower amperage but will allow the circuit to carry more amperage if the breaker is also increased in size. No. Ohm's law tells us that V = IR. For a given load, R is constant, and thus the only way to reduce current is to increase voltage.
What wire size for world's simplest motor?
Wire size is based on the amperage of the load. Without knowing what the motors's full load amperage is, an answer can not be given.
What gauge wire do you need to carry 240 volts 1000 yards?
Wire sizes are governed by the amperage the wire is to carry. To answer this question the load current is required.
What size wire will carry 52 amps - the service is 8 feet away?
For a distance of 8 feet and a current of 52 amps, a 6-gauge copper wire would be suitable to safely carry the load while minimizing voltage drop. It's important to adhere to local electrical codes and standards when selecting and installing wiring for any electrical system.
What is the appropriate wire size for a 220 volt circuit with a 40 amp load?
For a 220 volt circuit with a 40 amp load, the appropriate wire size would be 8 AWG (American Wire Gauge) copper wire.
