0
What else can I help you with?
Have a black white and red wire for a dryer plug what ones the ground wire?
The green or bare wire is typically the ground wire for a dryer plug. If your wires are black, white, and red, the white wire is usually neutral, the black is hot, and the red is also hot. You should double check with a voltage tester to be certain.
How do you wire a 3 wire European oven white black green to a US receptacle with 4 wires white black red and bare?
Connect the white wire from the European oven to the white wire in the US receptacle. Connect the black wire from the European oven to the black wire in the US receptacle. Connect the green wire from the European oven to the bare wire in the US receptacle. The green wire serves as the ground wire since you don't have a separate ground wire in the US receptacle.
In the US where do the blue red green and white wires on a fan go to when the ceiling has red black bare copper and white wires?
Black to Black - Black from the ceiling is a hot wire and should be switched Red to Blue - Red wire is another hot wire and should also be switched White to White - White from the ceiling is the neutral and should not be switched. Your wall should have two switches, one will control the red wire, one will control the black wire. If you wire your fan as above, one switch will turn the fan on, the other will turn the light of the fan on.
Have a red white black wires for a dryer plug what wires are hot ones?
In a typical dryer plug, the two hot wires are usually the red and black wires. The white wire is typically the neutral wire and the green or bare wire is the ground wire. Always consult the manufacturer's instructions to be sure.
How do you connect timer white and black house wire with red black and white wires?
House wire is "line" Black & White house goes to Black & White of Timer; the "load" (e.g. Pond Pump, etc.) is connected to the Red & White. Specifically, put all 3 whites together (nut or terminal); House (source)(line) Black to Timer Black; and "load" Black to Timer Red. The Red wire is the "Timed" (switched) hot wire.
Have a black white and red wire for a dryer plug what ones the ground wire?
The green or bare wire is typically the ground wire for a dryer plug. If your wires are black, white, and red, the white wire is usually neutral, the black is hot, and the red is also hot. You should double check with a voltage tester to be certain.
How do you install 220 receptacle with white black and bare wires?
Assuming the wires are the correct gauge for application and breaker you use black and white wires as hot. Put red electrical tape on each end of white wire and connect red and black to the breaker output and bare wire to ground lug in panel. At receptacle connect black and red to hot contacts and bare wire to ground lug.
How do you wire a 3 wire European oven white black green to a US receptacle with 4 wires white black red and bare?
Connect the white wire from the European oven to the white wire in the US receptacle. Connect the black wire from the European oven to the black wire in the US receptacle. Connect the green wire from the European oven to the bare wire in the US receptacle. The green wire serves as the ground wire since you don't have a separate ground wire in the US receptacle.
In the US where do the blue red green and white wires on a fan go to when the ceiling has red black bare copper and white wires?
Black to Black - Black from the ceiling is a hot wire and should be switched Red to Blue - Red wire is another hot wire and should also be switched White to White - White from the ceiling is the neutral and should not be switched. Your wall should have two switches, one will control the red wire, one will control the black wire. If you wire your fan as above, one switch will turn the fan on, the other will turn the light of the fan on.
How do you add a neutral wire for 220 volts?
Standard wiring for 220 volts which is also referred to as 240 volts, commonly has four wires. One is red, one is black, one is white and one is a bare copper wire. The red and black wire carry 120 volts each, the white wire in usually your neutral which hooks up to your ground along with the bare wire.
Have a red white black wires for a dryer plug what wires are hot ones?
In a typical dryer plug, the two hot wires are usually the red and black wires. The white wire is typically the neutral wire and the green or bare wire is the ground wire. Always consult the manufacturer's instructions to be sure.
Where does the red wire go, to the white or black wire?
The red wire typically goes to the black wire.
Which wire does the red wire connect to, black or white?
The red wire typically connects to the black wire.
What are the wire colors for a single phase 30 amp 220 plug?
The hot wires are red and black. White is the neutral, and there should be a bare or greencolored wire for grounding.
How do you connect timer white and black house wire with red black and white wires?
House wire is "line" Black & White house goes to Black & White of Timer; the "load" (e.g. Pond Pump, etc.) is connected to the Red & White. Specifically, put all 3 whites together (nut or terminal); House (source)(line) Black to Timer Black; and "load" Black to Timer Red. The Red wire is the "Timed" (switched) hot wire.
What is the red wire and what wire does it go with when there are three wires black red and white?
Red, white, and black are standard for a three-way switch (you have two switches that control the same fixture). You should also have a ground wire (copper, unsheathed). The black and red are negative, while the white is positive. It works pretty simply. When the switch is up, the black and white are linked, creating a circuit. When it is down, the red and white are linked. If both switches agree (both are red/white or both are black/white), then the circuit is completed and power flows.
How do you hook up ele plug in wires coming in to house the plug has white black and ground wires and the wire from the house has white black red and ground hooked to a 30amp fuse?
You will have to check to make sure. Normally, with 4 wires, the black and red are both power for 220. White for neutral and bare for ground. If you are only using one leg of it, you would use the black, white, bare ones and cap the red one. Someone may have used the 4 strand because they had it or 220 was planned but not done or both the red and black are hot. You should be able to tell in the panel. Do the red and black both connect to separate breakers or to one or is the red not connected?
