It depends on the thickness and the density. One ton should be about 15 cubic feet when compacted, so it would cover 30 square feet 6 inches thick or 45.
One ton of river rock will comprise a volume of rock. How much area that covers depends on what depth it is covered to.
Depends on if by 'customary' you're referring to a short ton or a long ton. A short ton is less than a metric ton; a long ton is more than a metric ton.
== == A square foot is a (two dimensional) measure of area, while a ton is a measure of weight. The two do not equate. On the other hand, a ton of a specific substance could have a specific (three dimensional) volume. For instance, if a one cubic foot concrete block weighed 100 pounds, 20 concrete blocks would equal a (US) ton.
1 ton.
To lift 1 ton (equal to 2,000 pounds) with a hydraulic system, you would need to apply 2,000 pounds of force. Since pressure is force divided by area, and the area of a typical hydraulic cylinder is around 1 square inch, you would need 2,000 pounds per square inch (psi) of pressure to lift 1 ton. In other words, you would need a hydraulic system capable of generating 2,000 psi to lift 1 ton.
The area of Tri Ton District is 598 square kilometers.
It would depend on what item the ton is comprised of. The area of a ton of feathers would be greater than the area of a ton of concrete. Answer 2 It would also very much depend on how thick the material was. A ton of feathers might take up less room than a ton of concrete if the feathers were a mile high and the concrete was an inch thick.
If I had one ton of lead in one block what would its dimensions be? 1 metric ton of lead is 88.18cm3
There are three measurements referred to as "ton" -Short ton (2,000 lbs.)Long ton (2,240 lbs.)Metric ton (or tonne, 1,000 kg./2204.6226218 lbs.)Assuming all three substances are measured in the same type of ton, they would all weigh the same - a ton is a unit of weight, not of density or area.
Square metres are an area, a ton is a mass the units are incompatible.
The main difference between a 2 ton and a 3 ton unit is their cooling capacity. A 3 ton unit can cool a larger space more efficiently compared to a 2 ton unit. The right choice depends on the size of the area you want to cool.
one ton equals one cubic meter of soil was 100mm deep it would cover 7sqm
That does not make any sense because a ton is a measurement of weight and a square meter measures a flat area.
My area is in cliff ton and i buy what ever i want its at staples
1200 SQFT
45
"A ton" can be taken in opinion. In some parts of the world, 1 inch would be thought of as a ton due to lack of rain in that area. In other areas, 80 inches could be though of as a ton, while 60 is not. This is up to opinion.