Yes so long as you know the weight of a given liquid.
For example 1 gallon of water = 8 lbs
You cannot convert gallons per minute to pounds per square inch. The quantities do not have the same meaning. Gallons are a measure of volume, and pounds are a measure of weight. Minutes are a measure of time, and square inches are a measure of area.
One pound of steam condenses back to one pound of liquid water. Since one gallon of water weighs 8.337 pounds, simply divide the weight of the condensate by 8.337 to find out how many gallons of condensate you have.
417.5 pounds for 50 US gallons.
sigh..really?? gallons is a volume in ftt. thus you cannot convert an AREA into a VOLUME, because ft2 does not equal ft3!! you can convert the volume of a cube into gallons though...
1 litre = 0.2642 [...] gallons.
convert 20,000 gallons to pounds
To convert gallons of water to pounds, you can use the conversion factor of 1 gallon of water = 8.34 pounds. So, if you have 10 gallons of water, it would weigh 83.4 pounds (10 gallons x 8.34 pounds/gallon).
To convert pounds of LPG to gallons, you need to know the specific gravity of the LPG. Once you have the specific gravity, divide the number of pounds by the specific gravity to get the equivalent volume in gallons.
An estimate would be 240 pounds. Pounds is a unit of mass/weight. Gallons is a liquid measure. They do not convert cleanly. The density of the liquid being measured can make a big difference. If the liquid is water, there is 8 pounds to a gallon.
water is roughly 8lbs per gallons..........convert your ounces into gallons and finish the math that way
1 metric ton = 2,204.62 pounds Gallons depends on the weight of the fluid.
The estimate would be just under 8 gallons. Pounds is a unit of mass/weight. Gallons is a liquid measure. They do not convert cleanly. The density of the liquid being measured can make a big difference. If the liquid is water, there is 8 pounds to a gallon.
You cannot convert gallons per minute to pounds per square inch. The quantities do not have the same meaning. Gallons are a measure of volume, and pounds are a measure of weight. Minutes are a measure of time, and square inches are a measure of area.
To convert 3000 tons of water to gallons, you first need to know that one ton is equivalent to 224 gallons of water. Therefore, to convert 3000 tons, you would multiply 3000 by 224 to get 672,000 gallons of water.
To convert pounds to US gallons, it depends on the substance being measured as the conversion factor varies. For example, for water, you can use the conversion factor of 8.34 pounds per gallon to convert 940 pounds into approximately 112.7 gallons.
To convert pounds to gallons for diesel fuel, you need to know the density. On average, 1 gallon of diesel fuel weighs about 7 pounds. Therefore, 207,538 pounds of diesel fuel would be approximately 29,648 gallons (207,538 pounds / 7 pounds per gallon).
Pounds is a unit of mass/weight. Gallons is a liquid measure. They do not convert cleanly. The density of the liquid being measured can make a big difference. If the liquid is water, there is 8 pounds to a gallon. This would be 87.5 gallons.