150 sq meters
first tell me the formula
The area of a parallelogram is equal to base times height. You can find the maximum area of a parallelogram by multiplying the length of a short side by the length of a long side. (This would be the area if the parallelogram were a rectangle.)You cannot know the area of a parallelogram if all you know is the length of the sides; you can only know the maximumpossible area. Imagine you slant the parallelogram a lot. The area will decrease, but the side lengths will stay the same.
The aea of a small parallelogram is small.To find out just how small the area is, you must specify how small the par'm is.
If the slope of a line is m then the slope of an altitude to that line is -1/m.
28.75m
Find the area of a rhombus whose side is 6 cm and whose altitude is 4 cm? . Area = base * height Altitude = height. Altitude = 4 cm . A rhombus has all 4 sides equal, so the base = 6 cm . Area = base * height . Area = ____sq. cm.
Area of a parallelogram = base*perpendicular height 25*height = 225 sq ft Divide both sides by 25 to find the length of the altitude: Altitude = 9 ft Check: 25*9 = 225 square feet
A parallelogram has 2 opposite equal acute angles and 2 opposite equal obtuse angles that add up to 360 degrees and so the angles are 60, 60 120 and 120 degrees.
130 is the area.
To find the area of a square or rectangle (a parallelogram is also a rectangle if two of the sides are a different length), you multiply length x width. Multiply 14 x 8 and you get 112.
first tell me the formula
For a parallelogram, the area is base x altitude. The altitude is the vertical distance between the base and the side opposite of the base. In a rectangle, which is also a rectangle, the side adjacent to the base, is equal in length to the altitude, because it is perpendicular to the base.
angle sum of a parallelogram
Assuming the area is 35 SQUARE metres and not 35 metres, Area = Base*Altitude/2 So 35 = Base*14/2 = 7*Base Base = 5 metres.
Area = Base*Height (in consistent units). So Base = Area/Height = 144 cm2/700 cm = 0.2057 cm.
The formula to find the surface area of a parallelogram is Base*Height.
You do not need to find. If it is a parallelogram, it must be 180 degrees.