0
How many gallons of water in a pond that is 2m by 2m and 1m deep?
Wiki User
∙ 15y ago
Begin by calculating the volume - you have all the information you need to do that. Next find the conversion factor that permits you to convert a cubic meter into gallons. Perform the algebraic conversion, and you will have your answer. The objective of your question is to prompt you to figure it out, and perform the math. Show your work on your answer sheet, or you will not receive full credit for the answer.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
How many gallons of water does a 1 acre pond hold that is 5 feet deep?
1 acre = 43,500 ft2vol = area * depth = 43,500*5 = 217,500 ft31 ft3 is approx. 7.48 gallons217,500 ft3 * (7.48 gal/ft3) = 1,626,900 gallons
How many gallons of water does a 3 quarter acre pond have that is 6 foot deep?
1 acre = 43,560 sq ft → volume pond (liquid) = 3/4 x 43,560 sq ft x 6 ft = 196,020 cu ft * In UK: 196,020 cu ft ≈ 1,220,976 imp gal * In US: 196,020 cu ft ≈ 1,466,331 US gal
How much water does a quarter acre pond five feet deep hold?
1 acre = 43,560 square feet If the sides of the pond are straight ... its cross section area is 1/4 acre all the way down to the bottom ... then its volume is (43,560/4) x (5) = 54,450 cubic feet = 407,314.3 gallons
How many gallons of water are in my pond that measures 18'x7'x 3'?
It's unlikely that your pond has vertical sides and is 3' deep everywhere, but if it were, it would hold 18 * 7 * 3 = 378 cu. ft. of water. Converting the dimensions to metric at the start makes everything easier. 378 * (12^3) * (2.54^3) give you the number of cc's, dividing that by 1000 gives you the number of liters (10703). Dividing THAT by 3.7854 (liters/gallon) gives you about 2828 gallons. A typical pond, however, probably slopes from very shallow at the periphery to maximum depth near the center. This means it likely holds 30 - 40% less than if it had steep vertical sides and a consistent depth (like a typical above-ground pool). Your pond is probably on the order of 1500 - 1900 gallons.
What does 1 million gallons look like?
1,000,000 US gallons is about 134,000 cubic feet. A round tank of 56 feet diameter by 56 feet high will hold 1 million US gallons. Also a round pond of about 413 feet diameter by 1 foot deep.
How many gallons of water are in 1 acre pond 6 feet deep?
If the pond is uniformly 6-feet deep it would contain about 1,955,109 gallons of water.
How many gallons of water does a pond 25 acres 6 ft deep hold?
A 25-acre pond that is uniformly 6 feet deep will hold about 48,877,714 gallons of water.
How many gallons of water in pond 6ft x 11 ft by 2.5 deep?
1234.29 gallons of water
How many gallons of water in a pond 15 ft deep 400 ft long and 30 feet wide?
This pond can hold up to 1,346,493.51 gallons of water.
How many gallons does a half acre pond hold that is 3 feet deep?
Approximately 977,553 gallons of water.
How many gallons of water does a 5 acre pond hold that averages 30' deep?
Approximately 48,878,000 gallons.
How many gallons of water in pond 7ft x8ft x 3ft deep?
1,256.727 (rounded)
How many gallons of water is in your pond which is 5ft x 8ft x 2ft deep?
2300
How many gallons of water are in an 8 feet by 10 feet by 2feet deep pond?
This pond can hold up to 1,436.26 gallons of water.
How many gallons of water does a 1 acre pond hold that is 7 feet deep?
43560x7x7.48052=2,280,960.1584
How many gallons of water does your pond hold it measures 7.5by5x1.9?
This pond can hold up to 533 gallons of water.
How many gallons of water will fill a 6 foot long by 4 foot wide by 4 foot deep pond?
598 Imperial gallons, approx.
