It is approx 5895891 US gallons.
A cylinder 50 feet in height and 6 inches in diameter can hold up to 73.44 gallons of water.
There need not be any water in the pipe! The volume of the pipe is 1044 Imperial gallons
This is kind of tricky, but here are the basics: Volume is the surface area of the cylinder multiplied by the depth of the water. Do not mix feet and inches, convert all dimensions to feet or inches, depending on the application. To calculate the surface area, measure the inside diameter of the cylinder, divide the diameter by 2 and then multiply by Pi (3.1416). Multiply the surface area by the depth of the water and use following information for conversion: water is 231 cubic inches per gallon or 7.481 gallons per cubic foot.
U tell me
In a pipe with diameter 8 ft, there will be just over 376 US gallons per foot.
Approx 1105480 US gallons.
A round pool with a 10-foot diameter and a 3-foot depth can hold up to 1,762 gallons of water.
1.15 gallons of water.
The calculation is: Diameter x Diameter x Depth X 5.9 = Number of Gallons For example: For a 15-foot round pool with a water depth of 3 ft: 15x15x3x5.9 = 3,982 gallons. Since you did not specify the depth of the water, I will provide an answer for a couple of likely depths below. Please note that this is the ACTUAL water depth NOT the height of the pool wall (the water is usually around 6 inchs lower than the wall height). 36 in depth: 3,982 gallons 42 inch depth: 4,646 gallons 48 inch depth: 5,310 gallons ...
For Circular Pools, here is the formula: Diameter X Diameter X average depth X 5.9 = Total Gallons So, it's 24 X 24 X 5 x 5.9=16992 It's about 17,000 gallons! Enjoy your pool!
Diameter X Diameter X Depth X 5.9 = number of gallons 25 X 25 X 4 X 5.9 = 14750 gallons
The calculation for a ROUND pool is: Diameter x Diameter x Depth X 5.9 = Number of Gallons For example: For example, the volume of a 15-foot round pool with an actual water depth of 3 ft is: 15x15x3x5.9 = 3,982 gallons. Please note that the DEPTH is the ACTUAL water depth NOT the height of the pool wall (the water is usually around 6 inchs lower than the wall height). Hope this helps ... http://www.poolspa.com/calculator/
Go to http://www.havuz.org/pool-calculators.htm
Cannot be answered with only these measurements. For a rectangular pool, the length, width and depth are needed. For a round pool, the diameter and depth are needed.
Length x Width x Average Depth = volume for a rectangular poolAverage depth x 0.5 diameter x 0.5 diameter x 3.1416 = volume of circular poolA swimming pool that measures 12 feet by 30 feet and has an average depth of 6 feet contains approximately 16,157 gallons of water.12 x 30 x 6 = 2,160 cubic feet1 cubic foot = approximately 7.48 gallons2160 x 7.48 = 16,156.8 gallonsA circular pool that has a diameter that measures 20 feet and an average depth of 6 feet contains approximately 14,100 gallons of water.6 x 0.5 x 20 x 0.5 x 20 x 3.1416 = 1885 cubic feet1885 x 7.48 = 14,099.5 gallonsSee related link for unit of measure conversion tool.
For a round above ground pool, the calculation is: Diameter x Diameter x Depth X 5.9 = Number of Gallons Please note that the depth is the ACTUAL water depth NOT the height of the pool wall (the water is usually around 6 inchs lower than the wall height). For your example: For a 24-foot round pool with a actual water depth of 3.5 ft: 24x24x3.5x5.9 = 11,894 or around 12,000 gallons.
Is 42 in inches or feet? I've answered the problem below for inches since that makes more sense for a pool. Volume of pool = area of pool * depth V = pi*r^2 * depth = 3.14*7.5*7.5*3.5 = 618 cubic feet The volume of 1 gallon of water = 0.133680556 cubic feet. Therefore, the # of gallons of water in the pool = 618/0.133680556 = 4623 gallons of water In actually, because of significant digits in the depth and diameter of pool, the answer would be approximately 4600 gallons of water