0
What else can I help you with?
How many ft pounds is 220 inch pounds?
220 inches = 181/3 feet 220 inch pounds = 181/3 foot pounds
How many quarts does a 9 inch by 9 inch baking dish hold?
the 9X13 holds 3 quarts
How many gallons does a 24x24x36 inch container hold?
24" x 24" x 36" = 89.8 US gallons.
How many gallons of water per foot will a one and one quarter inch pipe hold?
0.212 331 gallons per foot.
How many 32 are in 1 inch?
how many 32 are in 1 inch
How many inch pound equals 37 pounds?
37 lbs. converted to inch pounds equals 444 inch pounds.
How many pounds are in 250 inch pounds on a torque wrench?
There are 20.83 ft-lbs in 250 inch pounds. To convert inch pounds to foot pounds, divide by 12.
What is screw used to hold together?
One thing that can hold a screw in place is an anchor. You can also use a nut to hold a screw into place.
14 foot pounds is equal to how many inch pounds?
1 foot = 12 inches1 foot-pound = 12 inch-pounds
How many newton meters are in 10 inch pounds of torque?
10 inch-pounds is approximately 1.13nM
How many foot-pounds equal ninety inch-pounds?
90 inch - pounds (torque) = 90 / 12 = 7.5 foot pounds (torque)
250 inch pounds equals how many foot pounds?
To convert inch-pounds to foot-pounds, you need to divide by 12 since there are 12 inches in a foot. Therefore, 250 inch-pounds is equal to 20.83 foot-pounds (250 inch-pounds / 12 = 20.83 foot-pounds).
How many ft pounds is 220 inch pounds?
220 inches = 181/3 feet 220 inch pounds = 181/3 foot pounds
How many ft pounds in 25 in pounds?
25 inch pounds = 2.08333333 foot pounds
How many threads per inch does a 12-24 unc3a screw have?
24 threads per inch
How many inch pounds are in 25 foot pounds?
1 foot = 12 inches(1 foot) pound = (12 inch) pounds(18 foot) pounds = (18 x 12) = 216 inch pounds
How many revolutions of crank are needed to move the screw block 1 inch?
The number of revolutions needed to move a screw block 1 inch depends on the screw's lead, which is the distance the screw moves linearly with one full revolution of the crank. For instance, if the screw has a lead of 0.1 inches, it would take 10 revolutions to move the block 1 inch. To determine the exact number of revolutions, you would divide 1 inch by the lead of the screw.
