0
How much concrete would it take for a driveway 43 feet long by 18 feet wide by 6 inches thick?
Wiki User
∙ 13y ago
387 cubic feet. This is because 43x18x0.5 (as six inches is 1/2 of a foot) =387.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
A driveway is 162 feet long and 6 wide and 4 inches deephow many cubic feet of concrete will be required for the driveway?
Multiply length times width. IF your driveway was 1 foot thick that would be the number of cubic feet of concrete. HOWEVER- it is only 4 inches thick. That is .33 ft (one third of a foot). So take your answer you got from multiplying LxW, and divide by 3. That will be the number of cubic feet of the driveway's volume.
How many yards of concrete would it take to cover a 16 ' X 14' area 4 inches thick?
8.25 cubic yards of concrete
How tall would a stack of 1000 one dollar bills be?
According to the U.S. Treasury a dollar bill is .0043 inches thick. Therefore, a stack of 1,000 one dollar bills would be: 4.3 inches thick.
If you made a stack of nickels 100 inches tall how many nickels will you need?
1303 Nickels stacked up would be roughly 100 inches. A nickel is 1.95mm thick which is 0.07677165 inches thick.
How many sheets of polythene would it take to make a stack 6 inches tall?
That would depend on how thick the polythene sheets were.
A driveway is 162 feet long and 6 wide and 4 inches deephow many cubic feet of concrete will be required for the driveway?
Multiply length times width. IF your driveway was 1 foot thick that would be the number of cubic feet of concrete. HOWEVER- it is only 4 inches thick. That is .33 ft (one third of a foot). So take your answer you got from multiplying LxW, and divide by 3. That will be the number of cubic feet of the driveway's volume.
What area will 1 ton of crushed concrete cover?
It depends on the thickness and the density. One ton should be about 15 cubic feet when compacted, so it would cover 30 square feet 6 inches thick or 45 square feet 4 inches thick or 60 square feet 3 inches thick. It would make a driveway four inches thick, 9 feet wide and 5 feet long or a footpath 3 inches thick, three feet wide and 20 feet long.
How much much would the material cost for a 2000 sq ft asphalt driveway laid 2 inches thick?
$1,650
How much concrete would it take for a 40'x50' five inches thick?
30.81 cubic yards
How many yards of concrete would it take to cover a 16 ' X 14' area 4 inches thick?
8.25 cubic yards of concrete
How many yards of concrete will cover 20x20?
Depends on how thick it is. At 4 inches thick, you would nee about 5.5 cubic yards adjusting for safety. At 6 inches, you'd need about 8 cubic yards. You can play with different thicknesses with the linked concrete pad calculator.
How many yards of concrete would it take in 408square feet?
151/9 cubic yards for every 12 inches thick
How many sq ft does a yard of concrete cover concrete cover?
1 cubic yard covers 324 square feet per inch of thickness, divide 324 by thickness in inches to get coverage, i.e. 4 inches thick would cover 324/4=81 square feet, 36 inches thick would cover (you guessed it) 9 square feet.
How thick would a driveway be if I have 6 cubic yards of concrete in a 432 square foot area?
About 3 1/2 ". 432 x .375 = 162cf / 27 = 6 cu yards
How big is a 8 cubic feet slab of concrete 3 inches thick?
If you made a sidewalk about 2.5' wide it would be about 13' long.
What is the formula to figure cubic yards of concrete at 8 inches thick?
A pad that is 4 inches think covers 80ish sq ft per yard, so 8 inch would be 40ish sq ft per yard of concrete
How thick should asphalt in residential driveway?
four inches minimum. depending on your climate zone, and freeze / thaw. six inches deep would be the preffered. the only need to go deeper would be for large heavy duty trucks, semi trucks....
