0
Add your answer:
Earn +20 pts
What is the diameter of a steel rod?
There is no single diameter - there are steel rods of different diameters for different uses.
How much water will 1 meter of 125mm of steel pipe hold?
1 metre = 100 cm125 mm = 12.5 cmVolume of a cylinder = (pi) x (radius)2 x (length)Radius = 1/2 of diameter = 6.25 cmVolume = (pi) x (6.25)2 x (100) = 12,271.85 cm3 = 12.272 litres (rounded)
What is formula to calculate the cross sectional area of 1m steel bar?
If the bar is circular then it is: pi*radius square
A steel wire of length 4m and diameter 0.5mm stertches by 4 mm under the action of a load of 4kg.What is the Young's modulus of the material?
Answer
How many rainforceing steel bars per ton of different sizes?
for density of steel @ 7850 kg/m3 you can use No of bars (12 m long) per ton = (13500 / D2) where D= bar diameter in mm
What is the diameter of a steel pipe using a vernier caliper?
formula: (R+2t)=D where, R-radius or pipe t-thickness of pipe D-diameter of pipe. by using above formula we get the diameter of a steel pipe, by using vernier caliper
What is the weight of a steel rod whose dimensions are 6.5mm diameter and 1 meter length?
This depends on what type of steel. The density of carbon steel (one of the most common types of steel) is 7.85g/cm3Density = m/vradius of rod = 3.25mm (radius is 1/2 of diameter)3.25mm = .325 cm1 meter = 100cmvolume of cylinder = (pi)(radius)^2(h) = 33.18Density * Volume = mass7.85 * 33.18 = 260.46260.46 grams
What temperature change is required to increase its volume by a spherical steel ball bearing had a diameter of 2.540 cm at 25 oC. What is its diameter when its temperature is raised to 100 oC?
The volume change of a sphere can be calculated using the formula V = 4/3 * π * r^3, where r is the radius. The temperature change required to increase the volume can be calculated using the coefficient of thermal expansion of steel. The diameter of the steel ball bearing at 100°C can be calculated using the volume change and the new temperature, considering the change in radius.
Which was the first Tubular Steel Roller Coaster?
Matterhorn Bobsleds at Disneyland.
What is the best way to find the volume of a steel marble?
To find the volume of a steel marble, you can use the formula for the volume of a sphere, which is V = (4/3)πr^3, where r is the radius of the marble. Measure the diameter of the marble using a caliper, then divide it by 2 to get the radius. Plug the radius into the formula and calculate the volume using the value of π. This will give you the volume of the steel marble in cubic units.
What is the diameter of a steel rod?
There is no single diameter - there are steel rods of different diameters for different uses.
What material is a quad bike frame made out of?
Tubular steel or carbon fibre.
What material did Marcel Breuer introduce to modern furniture design?
tubular steel
How do you calculate cross sectional area for steel bars?
Measure the diameter = d cm. Then radius = d/2 cm and cross sectional area = pi*r2 cm2.Measure the diameter = d cm. Then radius = d/2 cm and cross sectional area = pi*r2 cm2.Measure the diameter = d cm. Then radius = d/2 cm and cross sectional area = pi*r2 cm2.Measure the diameter = d cm. Then radius = d/2 cm and cross sectional area = pi*r2 cm2.
Does tubular steel rust?
Yes, it will rust unless it is protected with paint, plastic or oil.
How do you calculate cross sectional area in rebar?
Most rebar (steel reinforcement bar) is approximately round. Measure the diameter of the bar, that is, the thickness of the bar. Divide the measurement by 2 to get the radius. Use the formula pi x r2 (3.14 x radius x radius) to get the cross sectional area. The formula works for all measurement units whether they are inches, millimeters, centimeters or others. An alternative is to use (pi x d^2)/4. (3.14x diameter x diameter divided by 4) You do not then need to divide the original diameter.
What method do I do used to determine the volume of a steel ball bearing?
You can determine the volume of a steel ball bearing by using the formula for the volume of a sphere, V = (4/3) * π * r^3, where r is the radius of the ball bearing. Measure the diameter of the ball bearing and divide it by 2 to calculate the radius, then plug it into the formula to find the volume.
