Error 9 on the 535 version of the aviva meter will indicate a fresh battery is requird. If you put a new battery into the unit and it displays E-9 again, take the battery out, press any button (arrow or power) and then insert battery again and give it a try. If the same issue is occurring please let accu-chek customer care know so they can replace the unit at no cost.
Change Battery!
The numbers are a red herring suggesting a mathematical answer to a grammatical error. The apostrophe is missing in its.
(15/sqroot(9))=5 So it is 5
There is a faster way Proven with EL-531TH Error 1: Not proper input Press any symbol that requires a number input after it (e.g. + - x ^) and press enter Error 2: Undefinable Ban be done by dividing anything by 0, but it is much faster to just press Log or In and then equals (requires you to reset your calculator before the run) Error 3: Press cos 25 times. May be a faster way. Error 4: Max input reached Rapidly press one key repeatedly until you reach the end of the row (indicated by a flashing triangle). Using a longer input such as cos does not decrease the number of presses required. It is exactly 143 characters to the end of the row. Then press enter. Happy Speedrunning :)
Deductive reasoning, trial and error. The square root of 78 will be between 8 and 9, closer to 9. 8.7 squared = 75.7 8.8 squared = 77.4 8.9 squared = 79.2 8.8 is the closest without going over.
Change Battery!
E-9 means the battery is low. Change the battery. If you still get the message than the battery needs to be replaced and the meter needs to be reset. Take the battery out. Press the left arrow key on the front. Insert a new battery (do not turn the machine on). Press the left arrow button again. Now you should be prompted to set the time and date. Once you have done that, power the meter off and you should be all set. Of course, they don't tell you any of this in the manual. Considering they charge you $105 for 100 test strips you would think they could have an up to date manual on their website... but they don't because they suck.
Error 9 on that particular changer is a weak RF signal error. That means that the unit is not sending out a strong enough signal to the antenna. Error 9 on that particular changer is a weak RF signal error. That means that the unit is not sending out a strong enough signal to the antenna.
9
data window error number [-9]
An error
Letter to Loretta - 1953 No Margin for Error 8-9 was released on: USA: 13 November 1960
There is only one set of data so there is only one mean. Therefore there is no standard error of the mean.
Armstrong Circle Theatre - 1950 Error in Judgement 7-9 was released on: USA: 5 February 1957
When you enter the security code wrong on a Citroen Saxo car stereo, it will display an error. If error 9 is displayed on your stereo, you have entered the wrong code nine times and your system is blocked. You will have to wait to enter the code correctly.
If you're weighing, about 0.04 or less.
Transformers Animated - 2007 Human Error Part II 3-9 was released on: USA: 25 April 2009