3.2x50x50 mm
To calculate square footage of a pipe you need to use the area formula of a circle, a=1/2bh. then find the circumference of the entire pipe.
"Solid Steel" would not be a pipe- it would be a rod. Weight of pipe will vary depending on the thickness of the wall of the pipe.
Use the formula for a cylinder.
8 inch schedule 40 pipe has a cross sectional area of 0.0583 square feet
15.875 x pipe size=
14 gauge
By stronger, we need to define the loading conditions of the rod or pipe. The strength of a rod or pipe is typically evaluated with axial, transverse (bending), and torsion loads. With the same diameter and the same material, a solid rod is stronger than a hollow pipe. However, with the same weight and material, the hollow pipe is stronger than a solid rod. Because a hollow pipe is lighter than a solid rod at the same diameter, the hollow pipe would have a larger diameter in order to match weights with the solid rod and a larger diameter rod or pipe is stronger than a smaller diameter one.
3.14/4x.04x.04xlenghtxdensity
assuming it's hollow. 10.68*ID*(OD-ID)
3.14x.025x.025xl
unit weight of 60mm dia hallow ms pipe
To calculate square footage of a pipe you need to use the area formula of a circle, a=1/2bh. then find the circumference of the entire pipe.
wt=volume x density of material...
In what material ?
unit weight = 10.68 (outer dia. of pipe - thickness of pipe) x thickness of pipe unit will be 'lbs/foot' 1 lbs = 0.45359237 kg and 1 foot = 0.3048 meter or 1 meter = 3.2808 feet
circle pipe ss 6" thickness 5mm
There isn't an answer to this question. Perhaps it needs to be re-phrased.