This varies greatly with the size of the banana in question.
Determine the volume of the banana using water displacement.
Determine the mass of the banana on a balance.
Density = mass/volume
The conversion factor from cubic meters to metric tons depends on the density of the substance being measured. To convert, you need to know the density of the material in question in units of metric tons per cubic meter. Then, you can multiply the density by the volume in cubic meters to determine the mass in metric tons.
for converting cubic meter to ton , density or specific volume is needed. specific volume unite is m3/kg. steam cubic meter/ (cubic meter/kg)= steam (kg ) /1000= tone of steam
Max. Dry Density (MDD) =2.230 Gram/ Cubic Centimeter = 2230KG/ Cubic metre Note - The value of MDD is calculated by conducting proctor density test as per IS 2720 (part -28) : 1983 (Reaffirmed - May 2015).
The density of gravel can vary depending on the type and size of the gravel. On average, gravel has a density of about 1.5 tons per cubic meter. Therefore, 1 ton of gravel would be equal to approximately 0.67 cubic meters of gravel. It is important to note that this is an approximate value and may vary based on the specific characteristics of the gravel being used.
kg. is a unit of mass, cubic cm. is a unit of volume. You can convert in the case of specific substances, if you know the density. For example, water has a density of 1000 kg. per cubic meter, or 1 gram per cubic centimeter; that is equivalent to 0.001 kg. for every cubic cm. For other substances, multiply this value with the density (in gram / cubic centimeter); for example, since the density of gold is about 19, each cubic cm. will have a mass of about 0.019 kg.kg. is a unit of mass, cubic cm. is a unit of volume. You can convert in the case of specific substances, if you know the density. For example, water has a density of 1000 kg. per cubic meter, or 1 gram per cubic centimeter; that is equivalent to 0.001 kg. for every cubic cm. For other substances, multiply this value with the density (in gram / cubic centimeter); for example, since the density of gold is about 19, each cubic cm. will have a mass of about 0.019 kg.kg. is a unit of mass, cubic cm. is a unit of volume. You can convert in the case of specific substances, if you know the density. For example, water has a density of 1000 kg. per cubic meter, or 1 gram per cubic centimeter; that is equivalent to 0.001 kg. for every cubic cm. For other substances, multiply this value with the density (in gram / cubic centimeter); for example, since the density of gold is about 19, each cubic cm. will have a mass of about 0.019 kg.kg. is a unit of mass, cubic cm. is a unit of volume. You can convert in the case of specific substances, if you know the density. For example, water has a density of 1000 kg. per cubic meter, or 1 gram per cubic centimeter; that is equivalent to 0.001 kg. for every cubic cm. For other substances, multiply this value with the density (in gram / cubic centimeter); for example, since the density of gold is about 19, each cubic cm. will have a mass of about 0.019 kg.
Gold.
The density of aggregate can vary, but on average it is around 1.5 tonnes per cubic meter. Therefore, 1 cubic meter of aggregate would weigh approximately 1500 kg.
Mass: kilogram, length: meter, volume: cubic meter, density: kilogram / cubic meter, temperature: celcius or kelvin.
Kilogram per cubic meter is the one that doesn't belong. Square meter is meter^2 and cubic meter is meter^3 but kilogram per cubic meter is a density
The soil density must be given to convert from a mass measure to a volume measure.Assuming a clay soil of density 1200 kg/cubic meter, then the volume is 1000/1200 cubic meter or 0.833 cubic meterAssuming a sandy soil of density 1500 kg/cubic meter, then the volume is 1000/15000 cubic meter or 0.667cubic meter
The weight of a cubic meter of Palm Kernel extract can vary based on factors like moisture content and density. On average, it weighs around 750 to 800 kilograms per cubic meter.
The weight of one cubic meter of sawdust can vary depending on the moisture content and the type of wood. On average, dry sawdust weighs around 200-300 kilograms per cubic meter.
The weight of a cubic meter of wet grass can vary depending on factors such as moisture content and density of the grass. On average, wet grass may weigh around 400-800 kilograms per cubic meter.
The weight of 10mm aggregate in 1 cubic meter depends on the density of the aggregate. On average, the density of 10mm aggregate is around 1.4 to 1.6 tonnes per cubic meter. So, the weight would be between 1,400 to 1,600 kg.
The SI unit of density is kilograms per cubic meter (kg/m^3).
The weight of a cubic meter of peridotite can vary depending on the specific composition of the rock. On average, peridotite has a density of about 3.2 - 3.4 grams per cubic centimeter, so a cubic meter would weigh around 3200 - 3400 kilograms.
The weight of steel can vary based on the type and density, but on average, the density of steel is around 7,850 kilograms per cubic meter. Therefore, the weight of 0.25 cubic meters of steel would be approximately 1,962.5 kilograms.