0
How many BTUs will it take to change 1 gallon of water at 32 degrees to ice at 32 degrees?
A BTU is the amount of heat required to heat or cool 1 lb of water 1 degree, water freezes at 32F so it should not require any more than 1 degree to be below freezing.
There are 8lbs in1 gallon of water, so 8 BTU's will lower a gallon(8 lbs) 1 degree.
What else can I help you with?
How many btus are required to change five pounds of ice at 20 degrees to steam at 220 degrees?
6,520 Btus
How many BTUs does it take to raise the temperature of water from 32 degrees to 300 degrees?
That will completely depend on how much water there is.
How many Btus will it take to raise 10 pounds of water from -5 to 220 Degrees?
2250
How long will a gallon of Kerosene burn at 30000 btu hours?
A gallon of kerosene typically contains about 135,000 BTUs of energy. At a burn rate of 30,000 BTUs per hour, a gallon of kerosene would last approximately 4.5 hours (135,000 BTUs ÷ 30,000 BTUs/hour = 4.5 hours). However, actual burn time can vary based on factors such as efficiency and burner design.
How many btus must be removed from one pound of water at 200 degrees f for it to end up as ice at 30 degrees f?
313 Btu
How many BTUs does it take to raise the temperature in a 40 gallon water heater 60 degrees F?
To calculate the BTUs needed to raise the temperature of a 40-gallon water heater by 60 degrees Fahrenheit, you can use the formula: BTUs = gallons × temperature rise × 8.34. For a 40-gallon heater, it would be 40 gallons × 60°F × 8.34 BTU/gallon°F, resulting in approximately 20,016 BTUs. Therefore, it takes about 20,016 BTUs to achieve that temperature increase.
How many BTUs does it take to heat 390 gallon tank of water from 60 degrees to 248 degrees?
The specific heat of water is 1 BTU per pound per degree Fahrenheit. There are 8.3378 lbs/gallon at 60 degrees, which equals 3251.742 pounds of water. The number of BTUs to raise it 188 degrees is then 611,327.496 BTUs.
How many btus are required to change five pounds of ice at 20 degrees to steam at 220 degrees?
6,520 Btus
How many btus are required to raise the temperature of 15 pounds of water from 100 degrees fahrenheit to 130 degrees fahrenheit?
To calculate the BTUs required to raise the temperature of 15 pounds of water, you can use the formula: BTUs = Weight of water in pounds × Temperature change in degrees Fahrenheit × 1 BTU So, the calculation would be: BTUs = 15 lbs × (130°F - 100°F) × 1 BTU = 15 lbs × 30°F = 450 BTUs.
How many btus does it take to raise 1 pound of water at 32 degrees to 212 degrees of steam?
It takes 180 BTUs to raise 1 pound of water from 32 degrees Fahrenheit to 212 degrees Fahrenheit to convert it completely into steam. This change in temperature includes heating the water from its freezing point to boiling point, then undergoing phase change from liquid to gas.
What is the BTU formula?
BTUs, or British Thermal Units, measure the amount of heat energy required to raise the temperature of one pound of water by one degree Fahrenheit. The formula to calculate BTUs is: BTUs = weight of water (in pounds) x temperature change (in degrees Fahrenheit) x 1. Alternatively, the formula can be expressed as: BTUs = (Flow rate in gallons per minute x change in temperature in degrees Fahrenheit) / 500.
How many BTU will it take to change 10 pounds of ice at 20 degrees to steam at 220 degrees?
To change 10 pounds of ice at 20 degrees Fahrenheit to steam at 220 degrees Fahrenheit, you need to supply enough energy to first melt the ice, then heat the water to the boiling point, and finally convert it to steam. This process requires approximately 180 BTUs per pound of ice to melt it, 180 BTUs per pound of water to heat it to the boiling point, and then 970 BTUs per pound of water to convert it to steam. So, for 10 pounds of ice, the total BTUs required would be around 18,300 BTUs.
How many BTUs does it take to raise the temperature of water from 32 degrees to 300 degrees?
That will completely depend on how much water there is.
How many btus are required to change one pound of ice at 20 f to steam at 220 f?
It takes approximately 144 BTUs to change one pound of ice at 20°F to water at 212°F, and an additional 970 BTUs to change the water to steam at 220°F, for a total of 1114 BTUs.
How many BTU's does it take to freeze 1 gallon of water?
To freeze 1 gallon of water, it requires approximately 144 BTUs. This is based on the latent heat of fusion, which is the energy needed to change water from liquid to solid at 32°F (0°C). Since 1 gallon of water weighs about 8.34 pounds, the total energy required includes the cooling of the water to its freezing point as well as the phase change.
How many btus are required to change 5 pound of ice at 20 degrees Fahrenheit to steam at 220 degrees Fahrenheit?
To change 5 pounds of ice at 20°F to steam at 220°F, you will need to go through multiple phases: raise ice temperature to 32°F, melt ice to water at 32°F, raise water temperature to 212°F, and then convert water to steam at 212°F to steam at 220°F. The total heat required, in BTUs, is around 503 BTUs per pound of ice, which translates to about 2515 BTUs for 5 pounds of ice.
How many btu's must be removed from 1lb of water at 200 degrees for it to end up as ice at 30 degrees?
There are no units for the temperature. The temperature change could be 230 Celsius degrees or 170 Fahrenheit degrees (94 Celsius degrees). In fact they could be in less commonly used units: eg Reaumur.
