343 dm3
The volume is 8 cubic cm.
726 cm2
A die is basically a cube. Calculate density by measuring the volume of the cube and dividing that into the weight of the cube. The volume can be calculated using the formula for a cube. Let's assume the holes in the faces are negligible. All three sides of a cube(Length, width and height) are the same length. Volume = length of side X length of side X length of side Measure the weight of the die. Density = Weight / Volume If the dots on the die are cut out, then you can get a little more accurate by measuring the size of the dot and calculating the depth. Then you would try to calculate the volume of a dot on the die. Then subtract this volume for each of the dots on the faces of the die. There are 21 dots(I think).
Zero it has no curved surface
Total numbers on a cube = 6Even numbers on a cube = 3Probability of rolling an even number on one fair cube = 3/6 = 50% .
The total surface area is 150mm2 and the volume of the cube 125mm3
The volume of this cube is: 1.728m3
The cube's volume is 1728cm3
The total surface area of the cube is 294 cm2 The volume of the cube is 343 cm3
Take the cube root of the volume to get the length of an edge. Square this number to get the area of a side, Multiply this by 6 to get the total surface area of the cube.
A cube with area 294cm2 has a volume of 343cm3 A cube with edge length 17.1cm has a volume of about 5000.21cm3
Cube root the volume and square it multiplying it by 6 As for example if its volume was 27 then its cube root is 3 and 32*6 = 54 which is the cube's total surface area
Its volume is 27 units cubed.
1728cm3
The volume of a cube that has a surface area of 343 is 432.2
Length = 9cm and total surface area is 486cm2
Total surface area = 864 cm2Area of each face = 1/6 of that = 144 cm2Length of the side of the cube = sqrt(144) = 12 cmVolume = 123 = 1,728 cm3