10.0 seconds
If the acceleration was constant (15 + 25) /2 = 20 (time does not figure into the averaging at all!)
The car's average acceleration is the change in velocity divided by the time taken. Here, the change in velocity is from 14 m/s to 25 m/s which is 11 m/s. Given that the time taken is 10 seconds, the average acceleration of the car is 1.1 m/s^2.
Acceleration is a measure of the rate of change of velocity.Assume the question is, "A car accelerates from 25 kph to 55 kph in 30 sec what is its acceleration?The formula for this calculation is v = u + ft : v = final velocity, u = initial velocity, f = acceleration, t = time. But all measurements have to be in related units. As speed is measured in kph then time needs to be converted to hours. 30 seconds = 1/2 minute = 1/120 hour55 = 25 + f/120 : 30 = f/120 : f = 30 x 120 = 3600 kph2As there are 3600 seconds in 1 hour then the acceleration can be stated as 1 kps2.
The acceleration of the car will be 8 m/s². This can be calculated using the formula a = F/m, where a is acceleration, F is force (200 N), and m is mass (25 kg). Plug in the values to get a = 200 N / 25 kg = 8 m/s².
The acceleration due to gravity is approximately 9.81 m/s^2 on Earth. When an object falls from a height of 25 m, it will experience this gravitational acceleration as it accelerates towards the ground.
25+(0.58*5.2) 25+3.016 28.016m/s^2
That's easy, if the car is initially traveling at 25 meters per second and gradually accelerates 3 meters per second for 6 seconds then the car is traveling at 43 meters per second.
Acceleration = (change in speed) divided by (time for the change) = (25) / (10) = 2.5 meters per second2
zero
Acceleration = (change in speed) divided by (time for the change)Acceleration = (25 - 0)/(3) = 81/3 miles per second2Don't try this at home. That acceleration is about 1,368 G's. You can not survive it!
Average acceleration = (change in speed) divided by (time interval)A = (40 - 25) / 15 = 15/15 = 1 meter/sec2
To find the acceleration between 25 s and 30 s, you would need to know the initial and final velocities during that time interval. Acceleration is calculated as the change in velocity over time. Once you have the velocities at 25 s and 30 s, you can use the formula: acceleration = (final velocity - initial velocity) / time.