You can not compare a square foot to a cubic foot because they are 2 different quantities!
Steel is typically 490 lb/cubic foot. There are 1,728 square inches in a cubic foot which means that each cubic inch weighs about .284 pounds (just a bit over a quarter of a pound per square inch).
Half a cubic foot.
A square foot is not going to hold any water, because it's flat. You need a cubic measurements for volume.
Technically, none. A square foot is a measure of area whereas it is the volume of water that is required. To convert from area to volume it is necessary to know the depth. A twelfth of a cubic foot will cover an area of one square foot to a depth of 1 inch. A cubic foot will cover it to a depth of 1 foot, 100 cubic feet will cover it to a depth of 100 feet.
0.093 square meters is equal to one square foot.
About 28.32 liters per cubic foot.
"Square cubic foot" or feet doesn't make sense. Either you have square feet, or cubic feet.
A cubic foot is a unit of volume. A square foot is a unit of area. The two units are therefore incompatible.
1 Cubic foot is equal to 6.22884 Gallons (UK)
Cubic feet connot be expressed in square feet as they are dimensionally different. Cubic (think of a box) is 3 dimensional as in volume, where square (think of a piece of paper) is 2 dimensional as in area.
A 20-foot square box has a volume of about 226.534 cubic meters.
A square foot is a common American unit of measurement. A square foot is equal to 144 square inches.
Steel is typically 490 lb/cubic foot. There are 1,728 square inches in a cubic foot which means that each cubic inch weighs about .284 pounds (just a bit over a quarter of a pound per square inch).
Half a cubic foot.
Nothing since a square foot is 2 dimensional.
A square foot is not going to hold any water, because it's flat. You need a cubic measurements for volume.
Technically, none. A square foot is a measure of area whereas it is the volume of water that is required. To convert from area to volume it is necessary to know the depth. A twelfth of a cubic foot will cover an area of one square foot to a depth of 1 inch. A cubic foot will cover it to a depth of 1 foot, 100 cubic feet will cover it to a depth of 100 feet.