No. There is no dirt in a hole of any dimensions. It's a hole. D'oh....
There's no dirt in a hole.
None! It's A freakin' hole!
None. Since it is a hole, there is no dirt in it. A hole, by definition, must be empty.
36 cubic feet of dirt.
Theoretically, none. The amount of dirt excavated to create such a hole would be 1 cubic metre. However, excavated dirt (depending on the nature of the dirt) can increase in mass by up to a third the original size. That is why when you dig a big hole then fill it in (getting all the dirt back) the hole is raised on top not flat.
As it is a hole, there is no dirt in it.However, assuming you have a cylindrical hole 3 ft wide, the volume of dirt removed to make the hole is:volume = π x radius2 x depth= π x (3/2)2 x 5 cu ft= 45π/4 cu ft≈35.34 cu ftIf your hole is a cuboid, that is it is 3 ft x 3ft by 5 ft deep, then the volume of dirt removed is:volume = length x width x depth= 3 x 3 x 5 cu ft= 45 cu ft.
None - nil - nothing in the hole but air!
As it is a hole there is no dirt in it. However, a cylinder of dirt with radius 1.5ft, depth 5ft and a volume of πr2h ~= 35.34 cu ft has been removed.
There is no dirt. It's a hole, so all the dirt is dug out already.
There is none. Because there is a hole! If you are asking how much dirt can fill the hole, then your answer is 27 cubic feet.
3 ft x 4 ft x 2 ft = 24 ft3
30 cubic feet of dirt have been removed,and no dirt remains in the hole.