0
What else can I help you with?
How much dirt can be taken from a hole measuring 3 ft long by 2 ft wide by 6 ft deep?
36 cubic feet of dirt.
How much dirt does it take to fill a hole that's 2ftx3ftx4ft?
To find out how much dirt it takes to fill a hole measuring 2 feet by 3 feet by 4 feet, you calculate the volume of the hole. The volume is found by multiplying the dimensions: 2 ft × 3 ft × 4 ft = 24 cubic feet. Therefore, it takes 24 cubic feet of dirt to fill the hole.
How much dirt is in a 5 feet deep and 3 feet wide hole?
As it is a hole, there is no dirt in it.However, assuming you have a cylindrical hole 3 ft wide, the volume of dirt removed to make the hole is:volume = π x radius2 x depth= π x (3/2)2 x 5 cu ft= 45π/4 cu ft≈35.34 cu ftIf your hole is a cuboid, that is it is 3 ft x 3ft by 5 ft deep, then the volume of dirt removed is:volume = length x width x depth= 3 x 3 x 5 cu ft= 45 cu ft.
How much dirt is in a hole that is 3 feet in diameter and 5 feet deep?
As it is a hole there is no dirt in it. However, a cylinder of dirt with radius 1.5ft, depth 5ft and a volume of πr2h ~= 35.34 cu ft has been removed.
How much dirt is there in a hole 3 foot by 3 foot by 3 foot?
There is none. Because there is a hole! If you are asking how much dirt can fill the hole, then your answer is 27 cubic feet.
How much dirt is in a hole that measures 2 ft by 3 ft by 4 ft?
There's no dirt in a hole.
How much dirt is in a hole 3 ft x 6 ft x 6 ft?
No. There is no dirt in a hole of any dimensions. It's a hole. D'oh....
How much dirt can be taken from a hole measuring 3 ft deep 2 ft wide and 10 ft long?
None. Since it is a hole, there is no dirt in it. A hole, by definition, must be empty.
How much dirt can be taken from a hole measuring 3 ft long by 2 ft wide by 6 ft deep?
36 cubic feet of dirt.
How much dirt is there in a hole that is three feet wide nfour feet long and two feet deep?
There is no dirt in a hole, as a hole is an empty space where dirt has been removed.
How much dirt does it take to fill a hole that's 2ftx3ftx4ft?
To find out how much dirt it takes to fill a hole measuring 2 feet by 3 feet by 4 feet, you calculate the volume of the hole. The volume is found by multiplying the dimensions: 2 ft × 3 ft × 4 ft = 24 cubic feet. Therefore, it takes 24 cubic feet of dirt to fill the hole.
How much dirt is in a 5 feet deep and 3 feet wide hole?
As it is a hole, there is no dirt in it.However, assuming you have a cylindrical hole 3 ft wide, the volume of dirt removed to make the hole is:volume = π x radius2 x depth= π x (3/2)2 x 5 cu ft= 45π/4 cu ft≈35.34 cu ftIf your hole is a cuboid, that is it is 3 ft x 3ft by 5 ft deep, then the volume of dirt removed is:volume = length x width x depth= 3 x 3 x 5 cu ft= 45 cu ft.
How much dirt is in a hole if the hole is 10 ft in width 5 ft long and 20 ft deep?
Theoretically, none. The amount of dirt excavated to create such a hole would be 1 cubic metre. However, excavated dirt (depending on the nature of the dirt) can increase in mass by up to a third the original size. That is why when you dig a big hole then fill it in (getting all the dirt back) the hole is raised on top not flat.
How many cubit inches of dirt are there in a hole that is 2 ft by 3 ft by 6 ft?
None - nil - nothing in the hole but air!
How much dirt is in a hole that is 3 feet in diameter and 5 feet deep?
As it is a hole there is no dirt in it. However, a cylinder of dirt with radius 1.5ft, depth 5ft and a volume of πr2h ~= 35.34 cu ft has been removed.
How much dirt is there in a hole 3 foot by 3 foot by 3 foot?
There is none. Because there is a hole! If you are asking how much dirt can fill the hole, then your answer is 27 cubic feet.
How much dirt is there in a 3 m 3 m 3 m hole?
There is no dirt. It's a hole, so all the dirt is dug out already.
