the formula for figuring out asphalt is.. L x W x D x 110 / 9 / 2000 = tons of asphalt. Where: L = Length in feet W = Width in feet D = Depth in inches 110 = a average weight of a square foot asphalt 1 inch thick /9 = convert to square yards /2000 = convert weight to tons So.. 27707 x 3 x 110 / 9 / 2000 = 508 tons.
I work with asphalt, paving roads. We have to figure out how mush asphalt it will take to pave or resurface a road. We do this based on the length, width and how thick we are going to put it down. With a known weight per square yard we can figure out how many tons of asphalt we will need for a given road. We also use this in reverse to check how much asphalt we are putting down per square yard as we go along.
Aproximately 17.78 Sq Yds of asphalt @ 1" thick per ton. Aproximately 17.78 Sq Yds of asphalt @ 1" thick per ton.
You have not said what substance you are using a ton of to cover the asphalt.
This depends on many factors like the area of the pavement being covered and the thickness of the pavement. This question is very general and can have many answers. Here are some conversions to help figure out how many sq ft 1 ton of asphalt cover. 0.056 tons asphalt/ SY (1 in thick) and 9 sf/1 SY. using these conversions will yield an answer of 1 ton of asphalt (1 in thick) coverinig 160.7 sf
The base or foundation can be between 6 and 10 inches thick. Over that is laid the asphalt anywhere from 1.5" to 3" in thickness. The asphalt driveway needs to be sealed at least every three years, more often in severe weather climates.
The amount of square feet in a ton of asphalt will depend on the thickness of the asphalt. If the asphalt is three inches thick it will have to cover the area three times. The type of asphalt used is also a factor towards weight.
Thick asphalt-impregnated paper used for roofing.
Approximately 721 Kg/CuM or 1586 pounds per cubic meter or 121 pounds per cubic foot or 20 pounds per square foot of 2". This IS crushed Asphalt. There or various types. source- http://www.contractortalk.com/f83/weight-asphalt-46232/ so one ton of asphalt would make 100 square feet of 2" thick pavement.
24 feet @ one inch thick
four
That's 2.4691 cubic yards. (rounded)
You will need 200 cubic feet.