mg zr
firing order
Ratio of shadows = 3m:7.5m :: 1:2.5 So, the ratio of the heights (in the same order) is 1:2.5 ie Ht(Pole):Ht(Building) = 40m:Ht(Building) = 1:2.5 So Ht(Building) = 2.5*40m = 100 metres
It's the voltage: HT high voltage LT low voltage Tension = voltage (French?)
The standard abbreviation for height is ht.
Not if the hexagon is a regular hexagon with sides of the same length as the sides of the square.
Sir I am Imran khan in nepal my problem is 6000KVA Step down Transformer is not charging. Transformer Pri- 33000V /105A Sec- 6900V / 502Atransformer all test (open & short circuit ) good . but problem is HT(IR)= value this time IR value 50M ohmBefore 3days HT(IR) = value is 7000M ohm suddenly start Transformer result is Transformer not charging & HT(IR) value is down 50M ohm.
i am confused i have a 1.25 ford fiesta and i have brought new spark plugs and h t leads and it is misfireing but the ht leads are in the correct order i think 1342 just wondered if any one could help me please !
I assume you mean the firing order? 1.3.4.2. with No 1 at the timing belt end to No 4 at the gearbox end.
Engine won't start
Firing order is 1-3-4-2.
all models 91-98 fire 1-3-4-2
Good. They are not supposed to.
to test ht lead with out taking it out of coil pack. All you have to do is remove the 1 cylinder ht lead and pull the cylinder 5 ht lead out aswell and measure the resistance with multi meter. so now it will give you the reading. so its 1,5---2,6---3,4 ht leads.
4, you can always find this out for any car by having a look under the bonnet and counting the HT leads! *NB - HT leads are the leads from your coil pack which disappear into the engine, which provide power to the spark plugs.
They are attached to the end of the HT leads.
i assume u mean HT leads? 1342 same as pritty much all 4 cyl
to carry the electricity from the coil pack to the spark plugs
ht stands for high trajectory and usually has about 13-14 degrees of loft