answersLogoWhite

0

hgft

User Avatar

Wiki User

12y ago

What else can I help you with?

Related Questions

Does Jones chopper is a stepup chopper?

Jones chopper is known as voltage commutated chopper...it is one type of chopper..


What are self-commutated voltage source inverters?

A self commutated is one which the means of communication is included with in the inverter itself.This is the case for circuits including electronic poer switches with turn off capability.


What is chopper amplifier?

In a chopper type amplifier the dc i/p voltage is converted into an ac voltage, amplified by an ac amplifier and then converted back into a dc voltage proportional to the original i/p signal


What is the difference between a step down chopper and a buck converter?

Choppers are dc - dc converters, on the basis of output voltage level step down chopper is used for output voltage less than input one. A buck converter is a step down chopper with a LC filter at the output end in order to reduce the voltage ripples.


How do you test chopper transformer?

A chopper transformer is a kind of transformer used in an switching power supply.The primary input voltage of it is a Direct current (D.C) unlike any other ordinary step down transformer which uses an Alternating Current (A.C).Chopper transformer uses a switching transistor to produce a secondary voltage..


How chopper works?

A chopper is an electronic device that converts a fixed DC voltage into a variable DC voltage. It operates by rapidly switching the input voltage on and off using a semiconductor device like a transistor. This switching action controls the average voltage and current supplied to a load by adjusting the duty cycle of the pulses. Choppers are commonly used in applications such as motor speed control and power regulation.


What is DC chopper?

chopper use a ststeing perpose..... dc means direct current that is low voltage


What is dcdc chopper?

A chopper or DC-DC converter is a circuit or technique used to convert a constant DC signal into a variable DC signal where by using switching technique known as PWM(pulse width modulation). A chopper is a static device that converts dc input into dc output voltage directly. A chopper may be thought of as an ac transformer since they behave the same.


What is morgans chopper?

It is a chopper (a device for step up or down dc voltage from fixed dc source) for low or medium load.Its main advantage is that it only required one thyristor. Capacitor and saturable reactor make it possible.


What charges the battery while running on an American ironhorse Texas chopper?

An AC generator sending power to a rectifier which converts it to DC voltage.


What should voltage read when testing charging on a 2002 dixie chopper xw2500?

When testing the charging system on a 2002 Dixie Chopper XW2500, the voltage should typically read between 13.5 to 14.5 volts when the engine is running. This indicates that the charging system is functioning properly and supplying adequate voltage to the battery. If the reading falls significantly below this range, the charging system may need inspection for issues such as a faulty alternator or voltage regulator. Always refer to the specific service manual for detailed specifications and troubleshooting steps.


How do you say chopper in Japanese?

Chopper = choppaa = motobike chopper = hericoputa = helicopter