0
Add your answer:
Earn +20 pts
Is 70 percent isopropyl alcohol a mixture?
Yes, it is.
What fraction of 10 percent alcohol should be mixed with 70 percent alcohol to obtain 50 percent alcohol?
2/3 of 70% and 1/3 of 10%
What is 70 percent of 118?
70 percent of 118 is 82.6
What is 70 percent of 1250?
875 is 70 percent of 1250.
70 percent of what number is 49?
49/0.7 = 70 Therefore, the number that 49 is 70 percent of, is 70.
Is 70 percent isopropyl alcohol a mixture?
Yes, it is.
Is 70 percent Isopropyl rubbing alcohol a heterogeneous?
No, 70% isopropyl rubbing alcohol is a homogeneous mixture because it is a uniform solution of isopropyl alcohol with water. It has the same composition throughout and its components are evenly distributed.
What are the recommended uses for a 70 percent isopropyl alcohol spray?
A 70 percent isopropyl alcohol spray is commonly used for disinfecting surfaces, cleaning electronics, and sanitizing hands. It is recommended for killing germs and bacteria effectively.
Why is 70 percent isopropyl alcohol more expansive than 40 percent isopropyl alcohol?
It is difficult and expensive to refine anything to 100% purity. Best to use 70% as it is just as effective and cost a whole lot less.
Does 70 isopropyl alcohol effectively kill germs?
Yes, 70 isopropyl alcohol is effective at killing germs.
Does 70 isopropyl alcohol stain clothes?
Yes, 70 isopropyl alcohol can stain clothes if it is not promptly washed off.
What is the smell of isopropyl alcohol 70 percent?
Isopropyl alcohol has a rather strong alcohol smell. If you were to smell regular alcohol and smell 70% Isopropyl alcohol you would have the same smell. However, there is no general way to explain it other than a strong bitter and sometimes sweet smell. It depends on solely your olfactory membranes. Smell's are after all different to everyone.
What is the density of 70 isopropyl alcohol?
The density of 70% isopropyl alcohol is approximately 0.87 grams per milliliter at room temperature.
What should the minimum percent of Isopropyl Alcohol be to prevent contamination of an IV?
The minimum recommended concentration of Isopropyl Alcohol to prevent contamination of an IV site is typically 70%. Below this concentration, it may not effectively kill bacteria and other microorganisms. Therefore, it is important to use a solution that contains at least 70% Isopropyl Alcohol to ensure proper disinfection.
40 percent isopropyl cheaper than 70 percent isopropyl?
Usually bulk buying is cheaper
How many ml of isopropyl are present in a 70ml bottle of rubbing alcohol?
A 70ml bottle of rubbing alcohol would contain approximately 70ml of isopropyl alcohol. Rubbing alcohol typically consists of 70% isopropyl alcohol, so in this case, there would be 49ml of isopropyl alcohol in the 70ml bottle.
What are the active ingredients in rubbing alcohol?
I believe it's ethyl alcohol. Also I think rubbing alcohol is 70% isopropyl alcohol and 30% water.. Hope i helped!Rubbing alcohol is a solution of 70% isopropyl alcohol (also called isopropanol or 2-propanol), and 30% Deionized water.Ethyl alcohol is something entirely different.Note that there are also different solutions of Isopropyl alcohol that can also be used for disinfecting and first aid, but Rubbing alcohol is the household name for the 70% Isopropyl alcohol solution.
