0
Add your answer:
Earn +20 pts
Can you wire a external and an internal ground together on a drier?
The ground wire should go from the dryer directly back to the distribution panel. An external ground wire is not required. The ground wire that is in the cord set that is connected to the frame of the dryer and the ground wire that is in the feeders coming from the distribution panel, that is connected to the ground terminal in the dryer receptacle, is all that is required to satisfy the code requirement.
Is ground wire required when installing wiremold 500 series?
Yes, because the wire-mold is just a slip together fitting, a positive ground medium can not be obtained. There are ground screw at all fitting junction boxes. Terminate the ground wire on these screws to make the grounding continuous.
Is a ground fault required in a basement?
Yes, If it is unfinished. Reference National Electrical code NFPA 70 for additional details.
Is earthing required in Underground transmission line?
Earthing is always required. It is necessary so that a fault or overvoltage, such as caused by a lightning strike, may be conducted to earth (ground), either dissipating the energy and/or tripping the protective device.
Can you install two ground wires in the same raceway?
There should be no reason to install two ground wires in the same conduit. Code requires that only a single path should be required if it is to carry a fault current. This ground wire should be single and continuous from the device back to the distribution panel. It is the fault current that is carried on the ground wire that trips the breaker or fault protection device. Don't confuse grounding wires with bonding wires.
Can you drain a fiberglass in ground swimming pool?
No!!! Under no circumstances should you drain a fiberglass in-ground pool. Unlike the standard in-ground pool, the fiberglass pool base is unreinforced concrete or other hard surface material that was applied directly to the soil in a thin layer. It is only there to allow the fiberglass to be sprayed on and form a hard shell. The weight of the water is what holds the fiberglass in place. If you drain the pool without refilling it immediately, you will allow external ground pressures and/or ground water to buckle the sides or bottom and you will have the fiberglass completely redone.
Are fiberglass pools usually above-ground pools?
No, they are usually in-ground. Many prefer fiberglass for it's lower cost, easier maintenance, and better algae control.
Is there fiberglass in snuff?
No, snuff is a smokeless tobacco product made from ground or pulverized tobacco leaves. It does not contain fiberglass.
Is fiberglass steps better than concrete steps for an in ground pool?
No, because fiberglass can make you slip unlike concrete steps
I am interested in in-ground fiberglass pools, is there a website where I can get further information on them?
Here is a company that specializes in building inground fiberglass pools and spas: http://www.vikingpools.net/
When was Christ Church Ground created?
Christ Church Ground was created in 1829.
What exactly does fiberglass swimming pool mean?
The in-ground pools are prefabricated. The bodies are made of fiberglass-reinforced plastic. This is an alternative to vinyl-lined, gunite and poured concrete pools.
Can fiberglass pools be above ground?
Generally no, as that material cannot take the weight exerted against it.
When was Church Road Cricket Ground created?
Church Road Cricket Ground was created in 1938.
When was Camp Ground Methodist Church created?
Camp Ground Methodist Church was created in 1860.
What are other choices if you are not able to get financed for a fiberglass pool?
there are aluminum pools, steel pools if they are above ground and they also have cement in ground pools that they build in your yard.
what is the approx.cost of a fiberglass pool and is it better than an above ground?
Far superior to an above ground pool, the fiberglass pool is still not cheap. If you install it yourself, depending on the various options, you will spend $12,000-$30,000. Add another $8,000-$20,000 to have it and a concrete barrier installed by a company.
