The question is impossible to answer for at least three reasons:
1. 1 square metre is a measure of area. The volume of wood requires its height as well.
2. Wood varies considerably in its density - from light woods such as balsa to dense ones such as ebony.
3. Weight depends on the force of gravity and that can vary from one point on the earth to another.
One square meter of wood flooring is measured by three feet in a meter and one square yard is 9 square feet. To make it easier just figure 10. It's easier to take the product back than to run out. Sometimes when you run out the store runs out as well.
The cost to install 650 square feet of wood floor depends on the wood chosen and who you choose to install it. The flooring itself can range from $1.80 to $15 per square foot, while labor can be anywhere from $2 to 8 per square foot.
A cord of wood is generally 8 feet long, 4 feet tall, and 4 feet wide. The wood is cut into 16 inch lengths. The amount of wood in the cord varies depending on the type of wood but the wood must occupy a space of 128 square feet.
none
A 2x10x18' board, typically made of softwood like pine, weighs approximately 40 to 50 pounds. The exact weight can vary based on the wood species and moisture content. For more precise calculations, it's best to check the specific density of the wood being used.
The weight of 1 cubic meter of timber wood can vary depending on the type of wood, moisture content, and density. However, on average, 1 cubic meter of timber wood weighs around 700 to 900 kg.
One square meter of wood flooring is measured by three feet in a meter and one square yard is 9 square feet. To make it easier just figure 10. It's easier to take the product back than to run out. Sometimes when you run out the store runs out as well.
There is no answer to this, a "square" (I assume a square meter) is a measure of area (2-dimensions), whereas a cubic meter is a measure of volume (3-dimensions).E.g.Suppose a piece of wood has a length and width of 1 meter each. This makes the wood 1 square meter in size.If you take 6 of these pieces of wood and build a box, the box will have length, width, and height of 1 meter (i.e. a cube). The box has a volume of 1 cubic meter.
It depends on the variety of the wood, whether is is seasoned and dry. From 170 kg per cubic metre for Balsa to 1370 kg per cubic metre for Lignum Vitae
Because balsa wood is much lighter
The weight of 1 cubic meter (m³) of wood varies depending on the type of wood and its moisture content. On average, dry wood weighs between 300 to 900 kilograms per cubic meter. For example, hardwoods like oak can weigh around 700-900 kg/m³, while softer woods like pine may weigh around 400-600 kg/m³. Always check specific wood density for accurate conversion.
That depends on the type of wood and the size of the logs. A Stere of oak can weigh twice what a stere of pine does
i9t cost £453.00 pounds to but per square inch. i9t cost £453.00 pounds to but per square inch.
too much that i cant aford it
1 meter
1000
One cubic meter of wood pellets typically weighs between 600 to 750 kilograms, depending on the type of wood and the density of the pellets. The moisture content and manufacturing process can also affect the weight. Generally, hardwood pellets tend to be denser and heavier compared to softwood pellets.