0.4 m-1 (Apex)
surface area of cube = 6a2 = 6 x42 = 84 cm. Volume of cube= a3= 4 x 4 x 4= 64 cm Ration of surface area : volume = 84:64 = 21:16
ration
Malthus
That would depend on the shape of the L -- on ration between the horizontal and vertical parts.
The answer can not be calucalted without additional information. If you only know the diagnol measurement, there are an infinite number of possible lengths for the adjoining sides. If this is a question regarding the sizing of TV screens, there are two current formats: standard, where the length to height ratio is 4:3; and letterbox (or widescreen) where the length to height ration is 16:9. Using these ratios and the diagnol length, you can calculate the length and height measurements by establishing: Length = 1.3333 * Height Then: (Diagonal)^2 = (Height)^2 + (1.3333 * Height)^2
0.4 m-1 is the ration of surface area 588m2 to volume 1372m3 for a sphere.
None.There is no such thing as a surface to volume area ration! Furthermore, there is no indication in the question as to what the 6 micrometres refers to.None.There is no such thing as a surface to volume area ration! Furthermore, there is no indication in the question as to what the 6 micrometres refers to.None.There is no such thing as a surface to volume area ration! Furthermore, there is no indication in the question as to what the 6 micrometres refers to.None.There is no such thing as a surface to volume area ration! Furthermore, there is no indication in the question as to what the 6 micrometres refers to.
Yes, the larger the surface area to volume ration the more the heat loss is, therefore, they've got smaller surface area to volume ration.
The ration between two corresponding measurements is called a rate. It separates miles per gallon and feet per second when corresponding.
There is no real reason for two equivalent measurements to be rationed! The ratio of two equivalent measurements will depend on the units used. The ratio between a length in feet and the equivalent length in inches, for example, is 12:1.
The 'scale' of the map.
The measurements include Signal to Noise Ration (dB), Total harmonic distortion (%) and Channel crosstalk (dB).
The surface area to volume ratio is 1:1 Surface area = (6*6) * 6 = 216 Volume = 6*6*6 = 216
water covers a bigger area of earths surface in ration 3 : 1
The smaller a cell is, the greater the ration of Surface Area to Volume. As the cell size increases, the ratio of surface area to volume decreases. Volume will increase rapidly while surface area increases slowly. Cells must maintain a balance between surface area and volume because the amount of surface area determines how much food it can take in and how much waste it can remove. The greater the surface area, the longer it can survive.
Ration coupons is a plural noun. The singular is ration coupon.
In Tamilnadu ration shops are opened by 8.30 am to 12 pm