10 amps
5 amps
6mm2 cable is rated at 40amps
It will taken 8 amps <<>> The conversion of 2.5 sq mm wire to AWG is equal to a #12 wire. The ampacity of a #12 copper wire with an insulation factor of 90 degrees C is 20 amps.
44.8AMPS
1 mm2 aluminium wire is not easy to buy but 1 mm2 copper wire is rated at 10 amps. Since the conductivity of aluminium is 7/12 that of copper, 1 mm2 aluminium wire would be rated at 7½ amps max (the same amount of heat is produced per metre by a current of sqrt(7/12) times that for copper).
The current carrying capacity of a cable can depend on factors such as the material, insulation, and installation method. For a rough estimate, a 125 mm2 cable can typically carry around 200-250 amps for standard copper conductors in common installation conditions. It is advisable to consult local electrical codes and standards, as well as a qualified electrician, for precise calculations.
According to the National Electrical Code (NEC), the ampacity of a 4 AWG THHN copper wire at 75°C is 85 amps, and 95 amps at 90°C.
That depends on how much current (Amps) is flowing through the copper. The voltage you lose in the copper will always be (A) times (R). 'A' is the current (amps) in the copper. 'R' is the resistance of the copper. You can look that up in a product catalog, or measure it with a really good ohm-meter.
A 2/0 copper conductor with an insulation rating of75 and 90 degrees Care rated at 175 and 185 amps respectively.
If you mean 2/0 copper wire it is rated 175 amps. # 2 wire is 115 amps. If you are referring to 2.0 metric it is rated 15 amps.
The normal current capacity of 12 AWG copper wire is 20 amps.