12ft times 12= 144 inches
in perspective
144/18.5= x/7.5
so 144 times 7.5= 1080 and divide by 18.5, gives you 58.3783...
divide by 12 to go back into feet, and the answer is 4.864
Marked: 162 inches Actual: 176 inches Truck: 170 inches Clearance: 6 inches
Depends on the model, and year which you fail to list.
Can and should are very different. Lifting a truck changes how the truck handles and performs, destroying the carefully designed balance of the truck. While it may be possible to lift it a foot, it will require changes to the drive train, steering, and brakes (at least), and should not be attempted without some very experienced help.
The question is supposed to say circumstance of 9 to 9.25 inches. The diameter is 2.8647 of a 9" ball and 2.9443 of a 9.25" ball.
The height of a pallet is such that a pallet truck or forklift truck can put their blades underneath and lift the pallet. From memory it could be between 6" to 9" high measuring from the ground.
depends greatly on the model and where you take the measurement. lowest point generally is 10-15 inches
1 to 6 or u can write it as 1:6
Peterbilt never made the T600. The T600 was built by Kenworth, and it ended production in 2007, at which point it was replaced in production by the T660.
I have a 1989 2500 4wd and it takes 245/75/R16. These are the original tires.
4.2 liter ( 256 cubic inches )
There is no such thing as a "standard" dump truck. Generally speaking, wheelbases can range from under 200 inches (single axle vehicle) to over 350 inches (at this point, you'd be getting into quints and centipedes).
I know some truck campers have mattresses that are 45 inches wide but I do not know what they are referred to as. S and S Camper Co. in Kalispell, Montana has put them in some of their earlier model truck campers like the short ones that will fit on a Toyota Tacoma truck bed.
Sometimes.
Marked: 162 inches Actual: 176 inches Truck: 170 inches Clearance: 6 inches
depending on model of truck.
Gonna need more info. They had many trucks. Give us the model and gross vehicle weight.
a 1973 Chevy truck has HEI Answer And if it does have points, say not the original engine, its .018-.019 will do.