Depends on the length of the ruler A 6 inch ruler would show 6 whole inches A 12 inch ruler would show 12 whole inches.
This site has software for you- sawmillsoftware.com
Typically the smallest lines are a sixteenth of an inch apart. Some rulers may show thirty-seconds or sixty-fourths of an inch.
Oh, isn't that just a happy little measurement! If you look at a ruler, you'll see that 2.16 inches is just a bit past the 2-inch mark and a little before the 3-inch mark. Just imagine all the wonderful things you can create with that length - maybe a tiny tree or a little stream in your painting. Just let your imagination flow and have fun with it!
It would be difficult. The smallest distance on most rulers is 0.1 inch. Some rulers do show 1/16 inch (=0.066..) and two of these units would be 0.133... inch. Near 0.13 but not quite.
Depends on the length of the ruler A 6 inch ruler would show 6 whole inches A 12 inch ruler would show 12 whole inches.
This site has software for you- sawmillsoftware.com
We cannot show pictures, sorry.
you can use an inch ruler to show equivelent fraction by using your brain and trying to think hard then if you still dont get it try to get an adult or a family member to help u
inch ruler
an inch ruler is 2.5cm and a cm is the same but smaller.....saichona
The answer depends on the measurement units used for 8.3
That depends on the ruler. If you refer to a 1 foot ruler, divided in inches and sub-inch divisions, then 0.39 inch is a more than a quarter inch, and less than a half inch.
On a standard ruler, 11.375 inches would fall between the 11-inch mark and the 12-inch mark. You would need to estimate the position between the two marks to indicate 11.375 inches.
Typically the smallest lines are a sixteenth of an inch apart. Some rulers may show thirty-seconds or sixty-fourths of an inch.
Oh, isn't that just a happy little measurement! If you look at a ruler, you'll see that 2.16 inches is just a bit past the 2-inch mark and a little before the 3-inch mark. Just imagine all the wonderful things you can create with that length - maybe a tiny tree or a little stream in your painting. Just let your imagination flow and have fun with it!
It would be difficult. The smallest distance on most rulers is 0.1 inch. Some rulers do show 1/16 inch (=0.066..) and two of these units would be 0.133... inch. Near 0.13 but not quite.