Volume of a cylinder = (pi) x (radius)2 x (length)Radius = half of the diameter = 1.395 mm1 foot = 304.8 mmVolume = (pi) x (1.395)2 x (304.8) = 1,863.43 cubic millimeters per foot.That's about 2,031 feet of hose to hold 1 gallon of fluid ... 2.79mm is an awfully skinny hose.
2.75 Imperial gallons.
The gallons per hour that come out of a hose depends upon two things: the diameter of the hose, and the water pressure. Since both of these vary, there is no single answer to that question. However, a one inch diameter garden hose at an average household water pressure could be expected to yield about 200 gallons per hour, in my estimation. Your mileage may vary.
Let me try and give you a hint. There is something called fluid flow formula. You basically need to know the speed at which the water is flowing and (in this case) the hose length and diameter. Well, it depends on how fast the water is running. Get a clock. Start filling a 10 liter bucket and stop after one minute. Is the bucket full (10 liters per minute), or half full (5 liters per minute)? Or did the bucket fill in half a minute (20 liters per minute)? The answer is in your hands (or in your bucket).
At 7.48 gallons per cubic foot that is 3.14x30x30/4x52 x7.48 /12 = 22,900 gallons
1.03 gallons
This will depend on where you live and the cost of water in that region. It will also depend on how hard the hose is turn on and how much water is running from it. For example, if the hose is spraying water at a rate of one litre per second, and the cost of water in your region is one dollar per litre, then it will cost sixty dollars a minute and a total of $3600 for the full hour.
Volume of a cylinder = (pi) x (radius)2 x (length)Radius = half of the diameter = 1.395 mm1 foot = 304.8 mmVolume = (pi) x (1.395)2 x (304.8) = 1,863.43 cubic millimeters per foot.That's about 2,031 feet of hose to hold 1 gallon of fluid ... 2.79mm is an awfully skinny hose.
41/2
A 2.5 inch fire hose has a capacity of approximately 60 gallons per 100 ft. Therefore, a 50 ft hose would hold around 30 gallons of water.
2.75 Imperial gallons.
A toliet uses 7 to 8 lites per flush!
Pure water can roughly hold 0.073 grams per cm at 20 degree Celsius.Impurities can change the figures.
Air at 30°C can hold approximately 30 grams of water vapor per cubic meter.
A 20' length of 4-inch hose can hold approximately 0.38 gallons of gasoline per foot. Therefore, 20 feet of this hose can hold around 7.6 gallons of gasoline.
The surface tension of water can hold up to around 72 millinewtons per meter. This property is due to the cohesive forces between water molecules at the surface.
1 and 1/2 gallons