how many a quarts of water hold
fill the 5 gallon jug with water then pour the water into the 3 gallon jug until its full then u will have 2 gallons in the 5 gallon jug. then if the jugs both have the same circumference u can just make the water in both jugs level then u will have 2 gallons of water in each jug. pour the water from the 3 gallon jug into the 5 gallon jug. and u should know that 2+2=4 :)
Fill the 5 gallon jug completely then pour that into the 3 gallon jug. Empty out the 3 gallon jug and pour the remaining water in the 5 gallon jug into the 3 gallon jug. Then just fill up the 5 gal jug again you will have 2 gallons in the 3 gallon jug and 5 gallons in the 5 gallon jug.
No.
There are lots of ways to do this, but here's one: Fill the 5 gallon jug to the top. Pour the water from the 5 gallon jug to the 3 gallon jug until the 3 gallon jug is full. What's left in the 5 gallon jug is 5 - 3 = 2 gallons. Dump what's in the 3 gallon jug. Put the 2 gallons from the larger jug into the smaller jug. Now fill the 5 gallon jug. You'll have 5 + 2 = 7 gallons, as needed.
They are 5 gallons, which converts to 19L.
Pitcher
There are 1000 mL in a 1 L jug.
A large jug for holding water or any liquid is a Pitcher. Or a Ewer, which is a large jug holding water for washing
Water coolers are very heavy and can weigh upwards of 60-80lbs without water. A 5 gallon jug of water weighs 40-50lbs and can be awkward to lift with out help. It is always best to clean the cooler once a month when you when you are doing a bottle change.
The density of an object is calculated by dividing its mass by its volume. In this case, the density of the jug would be 6 kg / 8 L = 0.75 kg/L.
how many a quarts of water hold
fill the 5 gallon jug with water then pour the water into the 3 gallon jug until its full then u will have 2 gallons in the 5 gallon jug. then if the jugs both have the same circumference u can just make the water in both jugs level then u will have 2 gallons of water in each jug. pour the water from the 3 gallon jug into the 5 gallon jug. and u should know that 2+2=4 :)
find a jug just wide enough to fit the whole potato. Find a measuring jug that the jug fits into. Fill the first jug with water and put it into the empty measuring jug. Place the potato into the full jug. Let the water spill into the measuring jug. Take the first jug out and the amount of water that spilled out is equal to the volume of the potato. This is called displacement and was devised by Archimedes.
A half jug of hot water would cool down faster than a full jug of hot water. This is because there is less water volume in the half jug, meaning it will lose heat quicker.
Do you mean a 'gallon jug' of water? If so, it is to give strength to the material of the jug.
Fill the 5 gallon jug completely then pour that into the 3 gallon jug. Empty out the 3 gallon jug and pour the remaining water in the 5 gallon jug into the 3 gallon jug. Then just fill up the 5 gal jug again you will have 2 gallons in the 3 gallon jug and 5 gallons in the 5 gallon jug.