The volume of the tank does not provide enough information about it dimensions.
It could be a squat tank with a large area or a tall but narrow tank.
convert inches to gallons in a 400 gallon tank
There's no way to answer that question until we also know something about the shape and dimensions of the tank. -- If it's a cylindrical tank, then we could do it with either the diameter of the base or the height of the tank. -- If it's a sphere, then we could do it with the diameter alone. -- If it's a rectangular tank, then we would need any two of its dimensions, or the area of the real estate that it sits on, or the area of any other single flat side of it.
Although its contents would evaporate, at a rate that depended on the shape and size of the opening, the tank's dimensions, and the heat conductivity of its material, the tank itself would most likely not evaporate at that temperature.
Only 1. Usually a Betta is all that is kept in a 3 gallon tank
A 20 Gallon tank can hold up to 20 gallons of water.
The dimensions of a 10,000 gallon oil tank are 120 inches wide by 17 feet tall. A 10,000 gallon oil tank empty weights about 8,500 pounds.
On average, a 10000 gallon fiberglass tank weighs between 1200 to 1700 pounds when empty. The weight can vary depending on the specific dimensions and design of the tank. It's always best to consult with the manufacturer for the most accurate weight information.
Dimensions are 28'' wide, 45" tall, and 60" long for a 275 gallon fuel tank.
The most common 1000 gallon oil storage tank is a flat-ended cylinder 48 inches in diameter. A gallon is 231 cubic inches. The area of a 48-inch circle (radius = 24") is pi*24² = 1809.56 in². 231,000 / 1809.56 = 127.7", or just under 10'-8". The nominal length is 10.5 feet.
The dimensions of an 80-gallon water tank can vary depending on the shape, but a common size for a cylindrical tank would be approximately 24 inches in diameter and 48 inches in height.
10.5' x 4'
900 Gallon Septic Tank (2 piece unit) 107" Long x 53" Wide x 59.5" Deep INLET 50.5" from bottom of tank to center of hole OUTLET 48" from bottom of tank to center of hole
The dimensions of the 80-gallon water tank are typically around 24 inches in diameter and 48 inches in height.
What are the dimensions of the tank? (Insufficient information)
It can have any dimensions as long as they equal 8 cubic feet.
It could have any dimensions as long as they equal 1,069 cubic feet.
Any dimensions so long as they equal 16,710 cubic feet.