sometimes it goes blank when your under pressure like for instence when you have a test
The Biochemical Oxygen Demand (BOD) of a sample is the amount of dissolved oxygen required by aerobic microorganisms to breakdown organic matter in the sample.The test is simple:Measure the Dissolved Oxygen content of the sample (a)Place in a sealed darkened bottleIncubate for 5 days at 20'CMeasure the Dissolved Oxygen content of the incubated sample (b)Generally you're using this test to analyse contaminated water, so you'll want to dilute it first - it may be that aren't enough aerobic microorganisms present to give you a measurable result, in which case you'll need to inoculate the sample with a suitable culture.The BOD of the sample = a - bBOD is expressed in mg O2/L of sample.Extra CreditGenerally you're using this test to analyse contaminated water, so you'll want to dilute it first - it may be that aren't enough aerobic microorganisms present to give you a measurable result, in which case you'll need to inoculate the sample with a suitable culture.The BOD of a diluted innoculated sample = ((a - b) - BOD of inoculated culture) * dilution factor
2 + 5 * 3 is one possible answer.
Reagent Blank : Take reagent and add deionised water (in place of sample to be tested). Now measure the OD at specific wavelength --> this OD is your reagent blank. Substract this OD from your test result (with sample) to avoid any false +ve effect due to colour of reagents itself.Sample Blank : Take sample and measure the OD without adding reagents --> this OD is your sample blank. Substract this OD from your test result to avoid any false +ve effect due to colour and turbidity of sample itself. As it is the fact that colour and turbidity of each sample would vary from one to another.So now it is clear that Reagent blank is used to avoid bias due to colour of reagents and Sample blank is used to avoid bias due to sample itself.
Four. An-y-bod-y
The factors that may affect BOD test include: 1. The temperature at which the test is performed. 2. The amount of seeding done
It is usually of five days but it may either be 3 days depending upon the the BOD test.
jamil jubo tahik letum
The graph on my test was confusing, so I left it blank.
Natural and tap water contain varying levels of organic and inorganic substances, as well as microorganisms, that can interfere with the BOD test by contributing to the oxygen demand. Consequently, distilled or deionized water is used as a blank dilution medium, providing a consistent baseline for measuring the oxygen demand of the sample being tested.
asdfasdfadsfadsfasdfasdfasdasdf
The BOD POD is a tool that is used to measure body composition. It utilizes air displacement technology. One uses the BOD POD by sitting in a chamber while the BOD POD measures the volume of air that a person's body displaces.
if unseeded, BOD = (D1-D2)/Pif seeded, BOD = ((D1-D2)-(B1-B2)f)/PD1 = DO of diluted seeded wastewaterD2 = DO of wastewater after incubationB1 = DO of diluted seed sampleB2 = DO of seed sample after incubationf = ratio of seed volume in seeded wastewater test to seed volume in BOD test on seedP = decimal fraction of wastewater sample used. (vol. of wastewater)/(vol. of dilution water plus wastewater)Maybe that helps
The main sources of error in a BOD test include incomplete sample mixing, temperature fluctuations affecting microbial activity, inconsistent incubation times, and microbial growth from outside contamination.
Ipod Use the related link below to help.
sometimes it goes blank when your under pressure like for instence when you have a test
COD measures the amount of oxygen required to chemically oxidize (break down) organic and inorganic matter in a water sample, while BOD measures the amount of oxygen consumed by microorganisms during a biological process that breaks down organic matter. COD typically gives a higher value than BOD because it includes both the chemical and biological oxygen demand in the water sample.