To convert the diameter of a 96-inch pipe to gallons per foot, we need to first calculate the cross-sectional area of the pipe (π * radius^2) and then multiply it by the length of the pipe in feet. You can then convert the volume to gallons using the appropriate conversion factor (231 cubic inches = 1 US gallon).
Ice exerts a pressure of around 35,000 to 40,000 pounds per square inch in a pipe. This pressure is due to the expansion of water when it freezes, causing the ice to exert a significant force on the walls of the pipe.
A 5-inch pipe will hold approximately 0.36 gallons of water per linear foot. This calculation is based on the formula for calculating the volume of a cylinder (V = πr^2h), where the radius (r) is half the diameter of the pipe (2.5 inches) and the height (h) is 1 foot.
Thread size refers to the diameter of a threaded rod or pipe. In the case of 0.125 Inch NPT thread, the 0.125 Inch refers to the nominal inside diameter of the pipe that the thread will fit into. This means that the thread is designed to fit a pipe with a 0.125 inch inside diameter.
To calculate pressure in pounds per square inch (psi) for a fluid flowing through a pipe, you need the fluid's density. Without knowing the density, we cannot directly determine the pressure using just the pipe size and velocity. The pressure would depend on the specific fluid being transported in the pipe.
The volume of a cylinder is (pi) x (radius)2 x ( length) .Radius is 1/2 of the diameter.Radius of a 3-inch pipe is 1.5 inches.1 foot = 12 inches1,000 feet = 12,000 inches1 gallon = 231 cubic inchesVolume = (pi) x (1.5)2 x (12,000) = 84,823 cubic inches = 367.2 gallons (rounded)
1/2 inch will easily do that.
0.3672 gallon per foot of pipe.
5.5 gallons per 15 feet of 3-inch pipe.
The volume is 3,848 cubic inches per linear inch of 70-inch diameter pipe. In terms of liquid volume, this pipe would contain 16.66 gallons of liquid per linear inch.
2.61153 gallons.
Yes, you could, but I would prefer 1.25 inch.Yes, you could, but I would prefer 1.25 inch.
A 12 inch diameter round pipe will hold 4.89 UK gallons or 5.88 US gallons per foot.
7 gallons
1/4 inch per foot.
61,101.8 gallons per 2,600 feet of 24" pipe.
78.34 gallons per 480 feet in a 2-inch pipe.
Approx 73,167