No, there is a tandem single pole 3030 but GE does not make a tandem two pole 3030.
No tandem breakers are of the same value.
No, it is not safe to use a double pole 15 amp breaker in place of a 20 amp single pole breaker for a 12000 BTU air conditioner. The breaker size must match the electrical requirements of the appliance to prevent overheating and potential fire hazards. It is recommended to consult with a qualified electrician to ensure the proper breaker is used.
You can use a 15 amp single pole breaker to convert your 30 amp double pole breaker to 15 amp 120v. Simply replace the 30 amp breaker with the 15 amp breaker in the circuit breaker panel. Make sure to match the wire size in the circuit with the appropriate amperage rating of the new breaker.
No, a double pole 50 amp breaker protects a 240 volt supply at 50 amps. The number that is on the handle of the breaker is the amperage that the breaker will trip at if an overload occurs on the circuit.
No, there is a tandem single pole 3030 but GE does not make a tandem two pole 3030.
You have a double pole breaker for 240Volt supply. The maximum current is 15 amp.
No tandem breakers are of the same value.
No, it is not safe to use a double pole 15 amp breaker in place of a 20 amp single pole breaker for a 12000 BTU air conditioner. The breaker size must match the electrical requirements of the appliance to prevent overheating and potential fire hazards. It is recommended to consult with a qualified electrician to ensure the proper breaker is used.
can a 20 amp double pole circuit breaker be used for 2 different 120 v circuits using 14 - 2 wire
You can use a 15 amp single pole breaker to convert your 30 amp double pole breaker to 15 amp 120v. Simply replace the 30 amp breaker with the 15 amp breaker in the circuit breaker panel. Make sure to match the wire size in the circuit with the appropriate amperage rating of the new breaker.
No, a double pole 50 amp breaker protects a 240 volt supply at 50 amps. The number that is on the handle of the breaker is the amperage that the breaker will trip at if an overload occurs on the circuit.
No, the wire will overheat.
No, you cannot use two separate 15 amp single pole breakers in place of a double pole 30 amp breaker. A double pole breaker is designed to simultaneously disconnect both circuit conductors, whereas using two single pole breakers would not provide the necessary protection for the circuit. It is important to use the correct size and type of breaker as specified by the electrical code for safety and functionality.
A double pole 30 amp breaker can pass 30 amps per pole, therefore #10 wire should be used.
Can be 30, 40, or 50 Amp 240 volt double pole depending on the HVAC specs.
Yes, a 2 pole 60 amp ITE Gould or Westinghouse breaker can replace a 2 pole 60 amp T and B unit as long as they have the same voltage rating and fit properly in the panel. It is important to make sure that the replacement breaker is compatible with your specific panel model.