(12) x (8.25/12) = 8.25 square feet
Depends on the size of the board.
If your talking about how much surface area it will cover, the answer is 5.5 square feet. 5.5 inches wide by 144 inches long=792 square inches. 792 square inches/12 inches per foot/12 inches per foot since your looking for square feet=5.5 square feet Another way to look at it is if you were to cut the 12 foot board down to 1 foot boards, you could double them up side by side and that would equal 11 inches x 12 inches. You would have 6 sets of 11 inches by 12 inches. So for each set you lose one inch in width for a total of 6 inches or a half foot. So you get 6 "square feet" minus the 6 inches total for the sets and end up with 5.5 square feet.
You can't convert that. You can convert feet to inches, or square feet to square inches.
You can find square inches from square feet by multiplying square feet by 144.
One square foot would be 12 inches by 12 inches, or 144 square inches. This means to convert square feet to square inches, multiply the number of square feet by 144 to to get the number of square inches.
8.25 square feet.
170
Approximately 5.8 square feet. Six square feet to be safe.
Depends on the size of the board.
it's either 2,000 square inches, 2,000 square feet, 2,000 cubic inches, or 2,000 cubic feet
you can't straight convert a linear measure to an area measure... missing info. If the board is 12" wide, then the ratio is one to one. if the board is 6" wide, the linear footage needed would be double. It's a simple ratio. width of board in inches/12 * length in feet = square feet. length in feet = square feet * 12 / width
you will need the board's thickness to answer this question.
That is 32 board feet.
8.4 sq. ft.
If your talking about how much surface area it will cover, the answer is 5.5 square feet. 5.5 inches wide by 144 inches long=792 square inches. 792 square inches/12 inches per foot/12 inches per foot since your looking for square feet=5.5 square feet Another way to look at it is if you were to cut the 12 foot board down to 1 foot boards, you could double them up side by side and that would equal 11 inches x 12 inches. You would have 6 sets of 11 inches by 12 inches. So for each set you lose one inch in width for a total of 6 inches or a half foot. So you get 6 "square feet" minus the 6 inches total for the sets and end up with 5.5 square feet.
Inches is a linear measurement and square feet is an area.It is an apples and oranges things.BUT, if you want square inches to square feet, use this:1 square inches = 0.00694444444 square feet
That is the wrong answer the correct answer is 3,888 because you would need to multiply there are 144 square inches in one square foot. So 27 square feet will be (24)(44)=3,888 square inches.