Q: How many 12x12 vinyl tiles will you need to cover 549 square feet?

Write your answer...

Submit

Still have questions?

Continue Learning about Other Math

Lets do length and width in terms of tiles. The length is 6m/0.2m/tile 30 tiles and the width is 5m/0.2m/tile 25 tiles. Then the area is l X w 30 tiles X 25 tiles 750 square tiles. Since each tile is square, 750 tiles.

8 pieces make a square for vinyl soffit. I install it and I know. 12" x 12' piece.

256 pieces exactly.

It is possible, but it's not the best practice. If you can easily remove the existing vinyl, then do so. If the vinyl won't peel up, then you should consider two possibilities: Remove the vinyl along with the wood underlayment (or scrape it off if your subfloor is concrete), or install new wood underlayment on top of the existing vinyl.A third possibility is this: If the existing vinyl is securely glued to the floor, you could apply an embossing leveler (cement-based product) in a very thin skim coat over the vinyl. This seals in any stains, levels the floor, and gives the new vinyl a nice, smooth surface to lay over (or a good surface for vinyl glue to adhere to).Most flooring manufacturers will not honor the warranty on their vinyl if it is installed over existing vinyl, unless you do the embossing leveler step above.

yes but only up to 3 layers

Related questions

192 tiles

1 tile = 1.77 of a square foot, 240 Sq.Ft. divided by 1.77 = 135.5 tiles ok

just do 249 divided by 18

I'm going to assume that the tiles are square inches, rather than square feet. But they can be converted to 3 square feet, which means 70 of them would cover the space if it were perfectly rectangular. Get 80 to be safe.

Lets do length and width in terms of tiles. The length is 6m/0.2m/tile 30 tiles and the width is 5m/0.2m/tile 25 tiles. Then the area is l X w 30 tiles X 25 tiles 750 square tiles. Since each tile is square, 750 tiles.

One whole piece, and 32.5 percent of another one.

A 12 by 12 vinyl floor tile covers an area of 1 square foot. If the room measures 16' by 16', it has an area of 256 square feet. So, you would need 256 12 by 12 vinyl floor tiles to cover the entire floor.

49 tiles will cover the are, with 1 inch strips spare

What is the weight of Vinyl Floor tiles per m2

18 inches = 1.5 ft, so each tile is 2.25 sq ft, number required = 249/2.25 = 111

You start by weep the vinyl tiles with a broom. Then Wash the vinyl tiles with disodium phosphate, using a nylon pad. What you need to do next uis rinse vertical-running tiles with wet rags. Rinse floor tiles with a mop. Let the vinyl tiles dry for two hours.

Depends ENTIRELY on the size of the vinyl squares !