any electrode with the first two digits 60 are 60000 psi tensile strength ex a 7018 would have 70000 psi tensile strength
Inches of mercury x 0.4912 = psi
The Greek capital letter for Psi is Ψ.
If it is fresh water, and the surface is at sea level, then the pressure at the surface is 14.69 psi. As you submerge, then the pressure from the weight of the water above you is added to the air pressure above the water. For each foot that you descend, the water pressure will increase by 0.4331 psi, so at 328 feet deep, the water pressure is 142.0568 psi. Add the 14.69 psi air pressure to get 156.7468 psi.
"600 psi" is not a compression ratio; it's a pressure. For a RATIO, you need to compare TWO different numbers.
There are approximately 26.107 psi in 180 kPa.
49 psi plus or minus 549 psi plus or minus 5
40 psi plus or minus 540 psi plus or minus 5
49 psi plus/minus 549 psi plus/minus 5
39 psi plus or minus 539 psi plus or minus 5
59 psi plus or minus 559 psi plus or minus 5
190+ psi, with a service limit of 180 psi From Haynes Repair Manual
40 psi plus or minus 540 psi plus or minus 5
Psi is Pounds (per) Square Inch. It is a measure of air pressure. an average HPA tanks run on a psi of about 4500. Guns have an operating psi, how much pressure to move all the parts, of 180 roughly.
Spec is 39 psi plus or minus 5Spec is 39 psi plus or minus 5
Water temp 180-200 deg. Pressure 18-22 psi.
it should be around 180