To find out how long it takes to fill 500 bottles, first determine the rate of filling. If 200 bottles take 12 minutes, then the rate is ( \frac{12 \text{ minutes}}{200 \text{ bottles}} = 0.06 ) minutes per bottle. For 500 bottles, it would take ( 500 \times 0.06 ) minutes, which equals 30 minutes. Thus, it will take 30 minutes to fill 500 bottles of soda.
It would take the too pipes 30 minutes to fill the tank when working together.This figure can be found in the following manner:Find the fill-speed of the first pipe50 minutes to fill 6000 Liters. 6000L/50m gives us 120L/m (liters-per-minute)6000 Liters in 75 minutes = 6000L/75m = 80L/mNext find the speed of the second pipeNow we combine the two rates (120+80), and we find that the pipes have a combined fill-speed of 200L/mFinally, we determine that it takes 30 minutes to fill the tank at 200L/m
You can fill 15 bottles of 200ml with a 3L jug of cordial.
If 2 taps fill 2/5 of the tank in 20 minutes then each tap fills 1/5 of the tank in that time. 3/5 of the tank is still to be filled. One tap therefore takes 3/5÷ 1/5 x 20 = 60 minutes = 1 hour to fill the rest of the tank.
To fill a 1 kiloliter tank, you would need 500 2-liter bottles. This is because 1 kiloliter is equivalent to 1,000 liters, and dividing 1,000 liters by 2 liters per bottle gives you 500 bottles.
To determine water pressure using the time it takes to fill a two-gallon bucket, you first measure the time it takes for the bucket to fill completely. Then, you can calculate the flow rate by dividing the volume of the bucket (two gallons) by the time taken (in minutes or seconds). A faster fill time indicates higher water pressure, while a slower fill time suggests lower pressure. This method provides a practical, though indirect, assessment of water pressure in a plumbing system.
55 minutes
32 UK fl oz will fill 6061 such bottles. 32 US fl oz will fill 6309 such bottles.
4.5 minutes
2 ounce of cough medicine will fill 1and1/2 medicine bottles. How many bottles will 12 ounces of cough medicine fill
The time it takes for a toilet to fill up completely can vary, but on average it usually takes about 2-3 minutes.
Say what? Several. Let's just go with several.
After drinking water, it typically takes about 30 minutes to 2 hours for the bladder to fill up.
go onto facebook and fill out the online form - it takes about 2 minutes
To convert gallons to milliliters, we know that 1 gallon is equal to 3,785.41 ml. Therefore, to find out how many 750 ml bottles are needed to fill a gallon, we divide 3,785.41 ml by 750 ml, which equals approximately 5.05 bottles. So, it would take about 5 bottles of 750 ml each to fill a gallon.
1 hour and a half, or 90 minutes.
15.1 bottles. 272/16= 15.135
It would take the too pipes 30 minutes to fill the tank when working together.This figure can be found in the following manner:Find the fill-speed of the first pipe50 minutes to fill 6000 Liters. 6000L/50m gives us 120L/m (liters-per-minute)6000 Liters in 75 minutes = 6000L/75m = 80L/mNext find the speed of the second pipeNow we combine the two rates (120+80), and we find that the pipes have a combined fill-speed of 200L/mFinally, we determine that it takes 30 minutes to fill the tank at 200L/m