To find the volume of a pipe, you can use the formula for the volume of a cylinder: V = Οr^2h, where r is the radius and h is the height of the cylinder. For a 2-inch diameter pipe, the radius is 1 inch. Thus, the volume of 12 inches of 2-inch pipe would be Ο * 1^2 * 12 = 12Ο cubic inches.
The volume of the pipe is (pi) x (radius)2 x (length)= (pi) x (2)2 x (120)= 1,507.964 cubic inches = 6.528 gallons (rounded). I have no way of knowing how much water may be in it.
The volume of water in a pipe can be calculated using the formula: V = Οr^2h, where V is the volume, r is the radius of the pipe (which is half the diameter), and h is the length of the pipe. Given a 4-inch pipe, the radius is 2 inches, and converting to feet, it becomes 0.167 feet. Therefore, the volume of water in a 4-inch pipe that is 10 feet long is approximately 7.89 cubic feet.
The volume of a pipe is proportional to the square of its diameter. Since the diameter of the 8-inch pipe is twice that of the 4-inch pipe, the 8-inch pipe can carry four times the volume of the 4-inch pipe.
That's a cylinder. The volume of a cylinder is (pi) (radius)2 (length)Radius = 1/2 diameter = 3/8 inch = 0.03125 footLength = 150-ftVolume = (pi) (.03125)2 (150) = 0.4602 cubic foot = 3.442 gallons (rounded)That's the volume of the piece of pipe. We have no way of knowinghow much water may be in it. It could even be empty.
The radius is half of the 4 inch diameter. Therefore, the radius is 2 inches.
Radius = diameter/2 so 16/2 = 8 inches.
To find the volume of a pipe, you can use the formula for the volume of a cylinder: V = Οr^2h, where r is the radius and h is the height of the cylinder. For a 2-inch diameter pipe, the radius is 1 inch. Thus, the volume of 12 inches of 2-inch pipe would be Ο * 1^2 * 12 = 12Ο cubic inches.
volume = pi r squared multiplied by the length you didnt specify wether 2 inch pipe was diameter or radius
circumference = 2*pi*radius or pi*diameter
The pipe is a cylinder.Volume of a cylinder = (pi) x (Radius)2 x (length)Radius = 1/2 diameterVolume of the pipe = (pi) x (1)2 x 120 = 120 pi = 377 cubic inches = 1.632 gallons.That's the volume of the pipe. I have no way to know if there's anything in it.
You multiply the radius of the circle 0.5 (radius of a 1 inch pipe) by 3.14(pi) by the height of the pipe 12 inches which gives you 18.84ozs.
7
what is the radius? It depends on the the radius. Formula 3.14*radius squared*5=answer
The answer will depend on whether it is a 2 inch pipe or a 2 cm pipe or a 2 foot pipe or whatever.The answer will depend on whether it is a 2 inch pipe or a 2 cm pipe or a 2 foot pipe or whatever.The answer will depend on whether it is a 2 inch pipe or a 2 cm pipe or a 2 foot pipe or whatever.The answer will depend on whether it is a 2 inch pipe or a 2 cm pipe or a 2 foot pipe or whatever.
The cross-sectional area of a pipe can be calculated using the formula for the area of a circle, A = Οr^2, where r is the radius of the pipe. Since the diameter of the pipe is given as 4 inches, the radius would be half of the diameter, so r = 2 inches. Plugging this value into the formula, we get A = Ο(2)^2 = 4Ο square inches. Therefore, the cross-sectional area of the 4-inch pipe is 4Ο square inches.
There's no possible way to figure that out.